Nashville, TN
Select Your Location
Jackson Jackson, TN. 38305 Set as my Location
Memphis Memphis, TN. 38134 Set as my Location
Nashville Nashville, TN. 37072 Set as my Location

Most Recent Pins (183)

Nick Panucci
Solace Heating and Air in Nashville, TN diagnosed a refrigerant leak in the evaporator coil. They recommend coil replacement and blower wheel cleaning to restore the HVAC system’s efficiency and performance.
Check-in Location
Refrigerant manifold gauge measuring A/C system pressures
Refrigerant manifold gauge measuring A/C system pressuresBlower wheel with rusted shaft inside HVAC system
Rodney Sneed
Check-in Location
Rodney Sneed
Check-in Location
Rodney Sneed
Check-in Location
Devin Felger
Solace Heating and Air performed an emergency heat changeout in Clarksville, Tennessee. They replaced the heating system quickly to restore warmth and ensure home comfort during urgent situations.
Check-in Location
Heating element assembly with wiring inside HVAC unit
Heating element assembly with wiring inside HVAC unitElectric heating element coil and blower assembly outdoorsElectric heating element and blower assembly outdoorsElectric heating element and wiring with corrosion
Rodney Sneed
Check-in Location
Rodney Sneed
Check-in Location
Rodney Sneed
Check-in Location
Rodney Sneed
Check-in Location
Nick Panucci
Solace Heating and Air replaced a blown capacitor and cleaned the condenser coil in Nashville, TN. They provide HVAC maintenance services that ensure systems run efficiently and reliably. This service helps improve cooling performance and extends equipment lifespan.
Check-in Location
HVAC capacitor with dirty wiring and cobwebs inside unit
HVAC capacitor with dirty wiring and cobwebs inside unitHVAC capacitor replacement and condenser coil cleaningCondenser coil clogged with heavy dirt and debris buildupCondenser coil of outdoor air conditioner unit cleaningCondenser coil and compressor unit with wiring and moisture
Rodney Sneed
Solace Heating and Air completed HVAC service at a residential property located in Nashville, TN. The work involved maintenance or repair on the home's heating and air system, as indicated by the company's specialization and the service setting at the address 2601 Habersham.
Check-in Location
Residential HVAC system exterior at 2601 Habersham
Nick Panucci
Solace Heating and Air repaired a heat kit short circuit in a residential system in Clarksville, Tennessee. They identified and fixed the electrical fault to restore proper heating function efficiently and safely.
Check-in Location
Heat kit with rusted heating coils inside HVAC unit
Heat kit with rusted heating coils inside HVAC unitElectric heat kit wiring with rusted connectors
Nick Panucci
Solace Heating and Air fixed thermostat issues at a commercial property in Franklin, Tennessee. They diagnosed that the problem with three thermostats reading above the set temperature was due to incorrect user settings.
Check-in Location
Commercial HVAC outdoor condenser units on concrete pad
Nick Panucci
Solace Heating and Air provided an estimate for replacing a 40-gallon natural gas tanked water heater with a 50-gallon model in Clarksville, Tennessee. They assessed the site and planned the installation to meet the customer’s increased hot water needs.
Check-in Location
Natural gas tank water heater with expansion tank
Natural gas tank water heater with expansion tankNatural gas water heater label with installation detailsNatural gas water heater with expansion tank connectionNatural gas tanked water heater with valve and piping
Nick Panucci
Solace Heating and Air in Nashville, Tennessee, identified and corrected a thermostat fan setting from ON to AUTO. This adjustment ensures efficient operation and improved energy use for residential HVAC systems.
Check-in Location
Goodman outdoor HVAC unit beside brick wall
Jose Acevedo
Solace Heating and Air diagnosed a failing main control board in a heating and air system in Tullahoma, Tennessee. They will order a replacement control board and return to complete the necessary repairs efficiently.
Check-in Location
HVAC air filter installed in return air vent grille
Nick Panucci
Solace Heating and Air replaced the coil temperature thermostat and the defrost control board in Franklin, Tennessee. They ensured the HVAC system's proper function by installing these key components accurately and efficiently.
Check-in Location
Defrost control board wiring in HVAC unit
Nick Panucci
Solace Heating and Air completed a heating system maintenance in Portland, Tennessee. Technicians discovered an underground propane leak and a flooded crawlspace during the inspection. The homeowner was previously unaware of both issues.
Check-in Location
Propane leak and flooded crawlspace in ground area
Propane leak and flooded crawlspace in ground areaPropane leak detection in dry, disturbed soil area
Nick Panucci
Solace Heating and Air performed routine heating maintenance on two systems in White House, Tennessee. Technicians inspected and serviced equipment to ensure reliable performance and improve system efficiency during colder months.
Check-in Location
Packaged rooftop heating unit and mini split system outdoors
Jose Acevedo
Solace Heating and Air completed HVAC maintenance in Spring Hill, Tennessee. Technicians inspected two systems, identified a failing contactor and indoor coil growth upstairs, and confirmed the newer downstairs system had no issues. Services included indoor air quality evaluation, duct cleaning quotes, and ordering polarized filters. Systems are currently operating normally.
Check-in Location
Condenser unit circuit breakers panel on brick wall
Condenser unit circuit breakers panel on brick wallAir conditioner dirty indoor coil and blower wheel close-upIndoor coil with rust and debris buildup in HVAC systemPVC drain pipes with blue sealant in crawl spaceIndoor blower wheel and associated mounting bracket close-up
Jose Acevedo
Solace Heating and Air completed heating system maintenance in Brentwood, Tennessee. Technicians inspected two units, identified a worn flame sensor in the upstairs system, and noted an aging pump in the downstairs unit. They recommended surge protection and UV sanitation upgrades. All findings were recorded, and estimates were sent to the customer. No service charge applied under the maintenance plan.
Check-in Location
Flame sensor and pump on furnace heating system
Flame sensor and pump on furnace heating systemHoneywell thermostat displaying current temperature and settingsHVAC blower wheel inside air handler unitUpstairs furnace flame sensor heating system ventFlame sensor view with blue burner flame inside furnace
Jose Acevedo
Solace Heating and Air completed heating system maintenance in Nashville, Tennessee. The team inspected and confirmed proper system function, installed new secondary flood control for the air handler, and tested performance after installation. The system now operates correctly and maintains consistent heat delivery.
Lennox outdoor HVAC unit with new flood control installed
Lennox outdoor HVAC unit with new flood control installedLennox air handler with new flood control installedAir handler flood control valve installation and pipingAir handler secondary flood control device with indicator lightsHoneywell thermostat showing heating mode at 70°F
Jose Acevedo
Solace Heating and Air addressed a heating issue in a basement system in White House, Tennessee. The technician replaced a faulty filter, adjusted closed vents, and found airflow loss due to debris in the blower wheel. A thermostat showed inaccurate readings. The system is now heating, and repair estimates were provided.
Check-in Location
Indoor blower wheel with dust buildup inside HVAC system
Indoor blower wheel with dust buildup inside HVAC systemRuud outdoor AC unit with diagnostic gauges attachedThermostat temperature reading check with digital probeBasement system air filter clogged and replacedBasement heating furnace with new filter and opened vent
Jose Acevedo
Solace Heating and Air completed heating system maintenance in Mount Juliet, Tennessee. The technician inspected the unit, replaced filters, tested ignition and thermostat functions, and installed a surge protector and ultraviolet system. These enhancements aim to improve system protection and efficiency. The system was fully operational after service, and all updates were approved by the customer.
Check-in Location
Furnace coil with ultraviolet sanitation system installed
Furnace coil with ultraviolet sanitation system installedFurnace ultraviolet sanitation system installed and operatingFurnace surge protector unit with green light indicatorFurnace vent grille with dust and discolorationFurnace UV light system panel with caution labels
Jose Acevedo
A technician in Dickson, Tennessee inspected a condenser for intermittent noise. The technician checked electrical components, verified airflow, and tightened all connections. A loose terminal was found in the outdoor disconnect. No functional issues were present during the visit. The system was cycled repeatedly and confirmed to operate normally at the time of service.
Check-in Location
Outdoor disconnect box with loose terminal and wiring
Outdoor disconnect box with loose terminal and wiringCondenser coil and refrigerant lines inspectionAir handler evaporator coil with minor dirt buildupCondenser fan shaft with rust and mounting boltHVAC duct insulated with reflective foil wrap in attic space
Nick Panucci
Solace Heating and Air repaired a mini split system in Nashville, Tennessee. The technician replaced a blown circuit board that prevented power from reaching the indoor unit. They also recommended adding a surge protector and cleaning the dirty indoor head to improve system function and reliability.
Check-in Location
Mini split outdoor condenser unit on brick wall
Mini split outdoor condenser unit on brick wallMini split indoor unit wall mounted with open ventsMini split indoor unit coil heavily caked with dirtMini split circuit board with burn damage
Nick Panucci
Solace Heating and Air inspected a heating system in Madison, Tennessee. The system had shut down due to recent power outages. After performing a reset, the system operated normally. Technicians documented several installation errors and provided the customer with a repair estimate.
Check-in Location
HVAC control board wiring with damaged metal edge
HVAC control board wiring with damaged metal edgeHVAC system wiring with damaged insulation near panel edgeHVAC electrical wires passing through sealed conduit holeRefrigerant line elbow and connector on HVAC unitHVAC furnace cabinet with damaged metal edge close-up
Jose Acevedo
Solace Heating and Air replaced a failing inducer motor and cleaned the indoor blower assembly to restore proper airflow in Nashville, Tennessee. The cleaning removed debris from the blower blades and housing, improving system efficiency. The repaired system now functions normally. All work includes a one-year parts and labor warranty.
Check-in Location
Indoor blower assembly with visible wheel removed from HVAC system
Indoor blower assembly with visible wheel removed from HVAC systemIndoor blower wheel with fine debris buildupInducer motor and blower wheel cleaning in HVAC unitInducer motor housing with moisture dropletsIndoor blower wheel with dust buildup and hand
Jose Acevedo
Solace Heating and Air completed heating maintenance on two systems in Smyrna, Tennessee. Technicians inspected motors, air flow, and filtration. They replaced one filter and cleaned sensors. The 21-year-old basement furnace showed early signs of motor and igniter wear. The homeowner was informed and chose to delay repairs. Both systems are currently heating.
Check-in Location
Basement furnace flame sensor with active burner flame
Basement furnace flame sensor with active burner flameGas furnace burner and flame during heating operationHeat exchanger section held for inspection during furnace checkUltraviolet sanitation system air filter replacementGas line piping assembly with fittings in basement furnace area
Nick Panucci
Solace Heating and Air restored heat in White House, Tennessee after an ice storm caused a system lockout. The technician reset the power and confirmed the system was working properly without further issues.
Check-in Location
Amana HVAC heat pump and air handler outdoor units
Jose Acevedo
Solace Heating and Air completed heating system maintenance in Murfreesboro, Tennessee. The technician inspected the heat pump, auxiliary heat, motors, capacitors, and airflow. The filter was found failing and needs replacement within 30 to 90 days. Surge protection on the condenser is working correctly. The heating system is operating as expected.
Check-in Location
Surge protection device on HVAC condenser circuit
Surge protection device on HVAC condenser circuitHeat pump evaporator coil and internal componentsHeating system air filter 15x20x1 failing conditionHeating system disconnect panel with insulation wrapHVAC blower wheel and motor assembly close-up
Jose Acevedo
Solace Heating and Air inspected a non-heating system in Murfreesboro, Tennessee. Technicians found a frozen condenser compartment, a shorting defrost board, and failing contactor and capacitor. The system is currently running on emergency heat. New parts will be installed under warranty at a later date following customer approval.
Check-in Location
Condenser unit frozen over with HVAC tools on top
Condenser unit frozen over with HVAC tools on topAir filter in dirty HVAC return vent slotCondenser coil and piping covered in thick frost iceAir conditioner sensor covered in ice and snow
Jose Acevedo
Solace Heating and Air resolved a no-heat issue in Nashville, Tennessee. The technician corrected a communication error between a high-efficiency furnace and condenser by tightening loose low-voltage terminals on the control board. The system now operates correctly and provides consistent heating.
Check-in Location
Thermostat display showing heat mode at 55°F temperature
Thermostat display showing heat mode at 55°F temperatureFurnace diagnostic code chart inside unit panelFurnace control board with loose wiring terminals fixed
Jose Acevedo
A technician in Smyrna, Tennessee inspected a new heating system due to issues with emergency heat activation from a Google Nest thermostat. They located incorrect wiring at the system itself, corrected the wiring, and confirmed proper heating function. The service was covered under warranty, and no charges were applied.
Check-in Location
System control wiring voltage check with clamp meter
System control wiring voltage check with clamp meterHVAC system wiring test with clamp meterFloor vent temperature reading during HVAC heating testRooftop HVAC unit with repaired heating wiringNest thermostat wiring base with labeled wires
Nick Panucci
Solace Heating and Air replaced a damaged condenser fan motor and blade under warranty after an ice storm caused freeze damage in Hendersonville, Tennessee. The heat pump froze during a power outage, and the motor broke from its mount when power returned. The team restored proper function by installing new components.
Check-in Location
Condenser fan motor and blade on heat pump unit
Condenser fan motor and blade on heat pump unitHeat pump condenser fan motor and blade replacement
Jose Acevedo
Solace Heating and Air repaired a no-heat issue in Brentwood, Tennessee. Technicians replaced a faulty low-voltage fuse, serviced the flame sensor, and rewired the circuit for a new fuse system. After testing, the system was confirmed to be heating properly. All installed parts include a one-year parts and labor warranty.
Check-in Location
Lennox furnace system with new low voltage fuse installed
Lennox furnace system with new low voltage fuse installedLow voltage fuse tester in HVAC system panelFlame sensor glowing blue inside furnace burner chamberBlower wheel inside HVAC system housing close-up viewHVAC system air filter installed inside vent grille
Jose Acevedo
Solace Heating and Air repaired a heating system in Nashville, Tennessee. The technician corrected thermostat wiring, removed ice from the outdoor unit, and confirmed proper defrost and pressure functions. The system now heats as expected. Work was completed under warranty, and the customer received information about routine maintenance options.
Check-in Location
Nest thermostat showing heating set to 76 degrees
Nest thermostat showing heating set to 76 degreesNest thermostat displaying heating at 76 degreesHeat pump condenser coil with frost removedCondenser unit frozen over with ice buildup outdoorsCondenser unit frozen over from winter storm ice buildup
Nick Panucci
Solace Heating and Air inspected a rooftop HVAC system in Nashville, Tennessee after an ice storm caused a power lockout. The team identified and cleared issues, restored system power, verified correct operation, and recommended surge protection to prevent future damage.
Check-in Location
Rooftop RUUD HVAC unit post-ice storm inspection
Jose Acevedo
A technician in Brentwood, Tennessee inspected a two-speed furnace that had previously failed to heat. After a system reset, the heating resumed. The technician checked air filters, blower settings, and heat cycles. No issues were found. The system is currently operating as expected. Maintenance and air quality options were discussed and estimates were sent.
Check-in Location
Nest thermostat showing heating at 69 degrees
Nest thermostat showing heating at 69 degreesNest thermostat displaying heating set at 69°FFurnace control board with flame visible on burner flame sensorFurnace blower wheel and motor wiring close-upHVAC air filter clogged with dust buildup
Jose Acevedo
Solace Heating and Air inspected a heating system in Spring Hill, Tennessee. Technicians found a failing indoor filter, heater kit, and terminals. The team informed the customer, secured approval, and ordered replacement parts under warranty. The system is currently running on heat pump mode while awaiting full repairs. A diagnostic fee discount will apply.
Check-in Location
Heater kit terminals with burnt wiring damage
Heater kit terminals with burnt wiring damageHeater kit and terminals on outdoor HVAC unitHoneywell thermostat displaying heating mode and temperatureIndoor air filter in HVAC system with dust buildupIndoor HVAC air filter 20x25x1 being replaced
Nick Panucci
Solace Heating and Air inspected a heating system in Springfield, Tennessee. The system had been converted from natural gas to liquid propane, but the wrong conversion kit was used. Technicians identified the issue and ordered the correct kit for proper operation.
Check-in Location
Heat pump unit with drill on top during inspection
Nick Panucci
Solace Heating and Air removed ice buildup from a customer’s heat pump after a freezing rainstorm in Springfield, Tennessee. Technicians cleared the system and confirmed proper operation. They also suggested ongoing maintenance to help prevent future issues related to severe weather.
Check-in Location
Heat pump unit covered in ice from freezing rain
Jose Acevedo
Solace Heating and Air completed heating system maintenance in Bellevue, Tennessee. The team inspected a one-year-old unit, checked heating and air flow components, reviewed the UVC bulb condition, and noted filter wear. Surge protection was confirmed. The system is operating without issues. All results were documented for record-keeping.
Check-in Location
Heating furnace unit with ducts and inspection tools
Heating furnace unit with ducts and inspection toolsHeating burner flame with surrounding wiring and cablesHVAC furnace draft inducer motor with wiring connections
Jose Acevedo
Solace Heating and Air completed heating system maintenance in Madison, Tennessee. The technician replaced a failed filter and inspected the system, identifying an overheating inducer motor due to failing bearings. A free system replacement estimate was provided, as the current unit is 19 years old and may have limited repair options.
Check-in Location
Heating unit with technician tool bag on top outdoors
Heating unit with technician tool bag on top outdoorsRusty gas line and PVC condensate drain near unitInducer motor amperage test with clamp meterInducer motor bearing shaft held above furnace unitFurnace heat exchanger and ignition wiring close-up
Jose Acevedo
Solace Heating and Air completed heating system maintenance in Spring Hill, Tennessee. Technicians inspected two systems, found no issues, and replaced customer-supplied filters. They recommended adding surge protection and indoor air quality improvements to support long-term system performance. A full report and cost estimate were emailed to the customer.
Check-in Location
HVAC flame sensor rod held by technician hand
HVAC flame sensor rod held by technician handIgniter rod held with screws and tool on gray surfaceHVAC air filter replacement at indoor system maintenanceHVAC air filter replacement leaning against wallHVAC system air filter replacement in ceiling vent
Adam Fleming
Solace Heating and Air completed seasonal maintenance on a package heat pump in Hendersonville, Tennessee. Technicians inspected system components, checked refrigerant levels, and verified electrical connections to support efficient operation during temperature changes.
Check-in Location
Adam Fleming
Solace Heating and Air completed gas back maintenance in White House, Tennessee. The technician inspected and serviced system components to support efficient operation and prevent future issues. This routine maintenance helps maintain performance and extend equipment life in residential heating systems.
Check-in Location
Jose Acevedo
Solace Heating and Air completed heating system maintenance on two units in White House, Tennessee. Technicians identified issues with flame sensors, inducer motors, and a damaged heat exchanger. They documented all findings, completed warranty-approved repairs to the upstairs system, and scheduled a follow-up estimate for replacing the downstairs unit.
Check-in Location
Rust and corrosion on HVAC heat exchanger surface
Rust and corrosion on HVAC heat exchanger surfaceHeat exchanger with rust and weak points inside unitHeat exchanger showing rust and weak pointsFlame sensor probe on HVAC heating systemFlame sensor on heating system with wiring and insulation
Jose Acevedo
Solace Heating and Air completed a heating system maintenance check in Nashville, Tennessee. The technician inspected a 14-year-old electric furnace and confirmed it was functioning correctly. No mechanical issues were found. The technician discussed optional upgrades for flood control and surge protection, but the customer declined them. A summer cooling inspection was recommended due to the system's age.
Check-in Location
Electric furnace heater kit with wiring and metal housing
Electric furnace heater kit with wiring and metal housingElectric furnace heater kit inside unit close-up
Adam Fleming
Solace Heating and Air completed maintenance on a split gas HVAC system in Springfield, Tennessee. The service involved inspecting and servicing both the furnace and air conditioning components to ensure proper operation and system efficiency.
Check-in Location
Jose Acevedo
Solace Heating and Air completed a single HVAC system maintenance in Madison, Tennessee. The technician replaced a polarized filter, inspected the UV system, and confirmed proper heating and airflow. The system operated without issues. A surge protection estimate was provided, and the thermostat was adjusted per the customer's request.
Check-in Location
Circuit breaker panel wiring inspection with screwdriver tip
Circuit breaker panel wiring inspection with screwdriver tipHVAC condensate drain pipe with elbow fitting outdoorsHVAC system heat exchanger close-up in ductworkHVAC blower fan close-up inside metal housingFloor vent air temperature testing device on vent
Adam Fleming
A technician identified an inoperable gas valve on a gas pack unit in Franklin, Tennessee. The inspection helped pinpoint a malfunction affecting system performance and safety. Prompt detection supports timely repair and avoids further damage to the HVAC unit.
Check-in Location
Jose Acevedo
Solace Heating and Air completed heating system maintenance in Brentwood, Tennessee. Technicians inspected two systems, replaced failed filters, noted a warm inducer motor, and found a blower capacitor out of range. The main system passed inspection. Technicians informed the customer of recommended repairs and surge protection. Both systems are currently running with reported issues.
Check-in Location
Gas furnace burner flames with wiring and pipes
Gas furnace burner flames with wiring and pipesFurnace metal vent ducting in attic spaceUpstairs furnace inducer motor inspection probe insertedAir filter grille showing heavy dust buildupInducer motor current clamp meter reading in furnace panel
Nick Panucci
Solace Heating and Air completed heating maintenance on two systems in Spring Hill, Tennessee. Technicians inspected and serviced both units to ensure proper function and efficiency during cold weather. Regular maintenance helps reduce wear and supports consistent performance across heating cycles.
Check-in Location
Lennox heating units outside brick house
Adam Fleming
Solace Heating and Air replaced a defrost board on a split heat pump in Goodlettsville, TN, restoring reliable heating performance during winter and preventing system freeze-ups in colder months.
Check-in Location
Jose Acevedo
Solace Heating and Air completed heating system maintenance in Brentwood, Tennessee. Technicians repaired a failing upstairs blower capacitor and installed surge protection on a sunroom minisplit. They also inspected the main system, confirmed proper heating, and recommended routine filter changes every 30–90 days to maintain efficiency. All systems tested successfully after service.
Check-in Location
Surge protection device installed on brick wall panel
Surge protection device installed on brick wall panelAir vent airflow digital meter measuring 108.1 CFMHVAC ignition electrode held by technician handOutdoor electrical disconnect box on brick wallMitsubishi Electric minisplit outdoor condenser unit
Nick Panucci
Solace Heating and Air completed heating maintenance on two systems in Smyrna, Tennessee. Technicians inspected components, tested performance, and ensured operational efficiency across both units. This service helps maintain consistent heating and supports system reliability during colder months.
Check-in Location
Heating unit outdoor condenser unit maintenance in Memphis
Heating unit outdoor condenser unit maintenance in MemphisHeat pump unit with maintenance tools on concrete slab
Adam Fleming
Solace Heating and Air completed seasonal maintenance on a package gas system and a split heat pump in White House, Tennessee. The service included checks to ensure system efficiency and reliable heating performance during colder months.
Check-in Location
Adam Fleming
Solace Heating and Air repaired a low-voltage issue with a split heat pump in Goodlettsville, TN, restoring electrical function and enhancing heating/cooling efficiency during winter months.
Check-in Location
Nick Panucci
Solace Heating and Air completed a heating maintenance service on a 4-ton gas package system in Brentwood, Tennessee. The team inspected the unit, recommended system upgrades, and provided an estimate to flush the home's tankless water heater.
Check-in Location
4 ton gas package heating system on concrete pad
4 ton gas package heating system on concrete pad4 ton gas package heating system outside home
Nick Panucci
Solace Heating and Air performed heating system maintenance in Goodlettsville, Tennessee, cleaning the condensing coil and assessing system efficiency. The technician provided recommendations to optimize heating performance for winter comfort.
Check-in Location
Condensing coil covered in dirt on HVAC unit
Condensing coil covered in dirt on HVAC unitCondensing coil with dust and spider webs buildupCondensing coil cleaning on heating system unitCondensing coil on HVAC outdoor unit maintenance
Adam Fleming
Solace Heating and Air performed maintenance on a split gas HVAC system in Goodlettsville, Tennessee, inspecting key components and verifying optimal efficiency to support reliable heating and cooling throughout seasonal changes.
Check-in Location
Jose Acevedo
Solace Heating and Air completed a heating system maintenance in Murfreesboro, Tennessee. The technician replaced a failed indoor filter, tightened high voltage connections, and inspected the air handler and condenser unit. The system is currently heating correctly. The customer plans to schedule future repairs and add surge protection for the inverter-driven system.
Check-in Location
Temperature probe on HVAC condenser unit reading 28.2°F
Temperature probe on HVAC condenser unit reading 28.2°FHVAC capacitor testing with multimeter reading 5.00Bosch heating system air handler with piping insulation
Nick Panucci
Solace Heating and Air completed heating maintenance on a split 80% furnace and a mini split system with two ductless heads in Brentwood, Tennessee. The technician inspected the equipment and gave recommendations based on current system conditions.
Check-in Location
Mini split outdoor condenser unit by brick wall
Mini split outdoor condenser unit by brick wall80% gas furnace with vent pipe in basement
Jose Acevedo
Solace Heating and Air completed heating system maintenance in Nashville, Tennessee. Technicians identified a rusted electrical disconnect causing sparks and tightened the lugs. They inspected the system in heat mode and confirmed proper operation. The customer received information about potential repairs and system upgrades.
Check-in Location
Heating vent temperature check with digital thermometer
Heating vent temperature check with digital thermometerElectrical disconnect fuse with interior rust and wiring nearbyHeating system metal coil and insulation close-up viewFurnace burner tubes with blue flames heating systemHeating system heat exchanger with surface damage
Adam Fleming
Solace Heating and Air performed maintenance on a split heat pump in Erin, Tennessee. The service included inspecting system components and ensuring efficient operation. Regular maintenance helps improve performance and extends the unit’s lifespan.
Check-in Location
Nick Panucci
Solace Heating and Air completed heating maintenance on two split 80% furnaces in Nolensville, Tennessee. One unit was venting exhaust into the room due to an improperly designed flue. The technician recommended installing a power venter in-line with the flue to improve exhaust discharge and ensure safe operation.
Check-in Location
80% furnace flue vent with ductwork in attic space
80% furnace flue vent with ductwork in attic spaceFurnace flue pipe with improper venting in ceiling cavity
Jose Acevedo
Solace Heating and Air inspected a residential HVAC system in Murfreesboro, Tennessee, due to high energy bills and poor temperature control. Technicians replaced a failed compressor contactor and verified proper heat function. The customer enrolled in a single-system maintenance plan. Repairs were completed under warranty, and the system is now operating correctly.
Check-in Location
Insulated HVAC ductwork in attic space
Insulated HVAC ductwork in attic spaceThermometer measuring HVAC vent temperature on wood panelDuctwork insulation and support in attic spaceLennox HVAC unit with diagnostic gauges and tool bagHVAC system contactor showing carbon buildup and corrosion
Daniel Heady
Solace Heating and Air completed heating maintenance in White House, Tennessee, on one gas package unit and two split gas furnaces. Technicians inspected heating function, thermostat response, and safety controls. All systems worked correctly. The team also discussed UV air sanitation options to support air quality and system cleanliness. No repairs were needed.
Check-in Location
Gas furnace flame sensor installed inside burner assembly
Gas furnace flame sensor installed inside burner assemblyGas package unit heat exchanger inside HVAC systemGas package unit with open control panel during serviceGas package unit heat exchanger coil close-up view
Adam Fleming
Solace Heating and Air completed a maintenance service on a package heat pump in Clarksville, Tennessee. The technician inspected, cleaned, and tested the unit to ensure efficient operation and prevent future issues. This routine service helps maintain system reliability and energy efficiency throughout the year.
Check-in Location
Daniel Heady
Solace Heating and Air inspected and serviced two gas furnaces in Hendersonville, Tennessee. Technicians cleaned burners and heat exchangers, tested ignition systems, confirmed proper combustion and gas pressure, and verified blower motor function. They also checked electrical connections, safety controls, and condensate drainage. Both systems were tested to ensure safe and efficient operation.
Check-in Location
Gas furnace burners with blue flames during inspection
Gas furnace burners with blue flames during inspectionHVAC air ductwork and attic filters in framing spaceGas furnace vent pipe in attic with wood framingFurnace blower wheel with dust buildup close-upGas furnace burners with blue flame combustion
Adam Fleming
Solace Heating and Air performed maintenance on a split heat pump and a split door fuel system in Hendersonville, Tennessee. The service included inspection and upkeep to support system performance and reliability during seasonal use.
Check-in Location
Jose Acevedo
Solace Heating and Air completed a heating system maintenance service in Brentwood, Tennessee. The technician inspected motor function, gas flow, air filtration, and flame detection. They cleaned the sensor, replaced the air filter, and confirmed the system is heating correctly. A filtration upgrade and ultraviolet sanitation were recommended for improved system performance.
Check-in Location
Flame sensor cleaning tool near furnace pipe in HVAC system
Flame sensor cleaning tool near furnace pipe in HVAC systemFlame sensor cleaning tool held during HVAC maintenanceHVAC blower wheel close-up with central shaftClamp meter measuring HVAC motor current flowElectrical junction box with plugged power cord and switch
Adam Fleming
Solace Heating and Air completed a one-system maintenance on a package heat pump in Erin, Tennessee. The service included inspecting components, checking system performance, and ensuring efficient operation for consistent heating and cooling.
Check-in Location
Daniel Heady
Solace Heating and Air completed a full maintenance service on a split heat pump system in White House, Tennessee. Technicians inspected system components, verified proper heating operation, and identified indoor coil buildup. They discussed options for air quality improvements, including UV light and polarized media filtration systems.
Check-in Location
Goodman heat pump outdoor unit with service tools
Goodman heat pump outdoor unit with service toolsIndoor coil buildup inside split heat pump system casingSplit heat pump system with duct and drain pipe
Daniel Heady
Solace Heating and Air performed heating maintenance on a split heat pump unit in Hendersonville, Tennessee, tightening all electrical connections, verifying system operations, and advising the homeowner on optimal seasonal performance and maintenance tips.
Check-in Location
Heat pump evaporator coil with heavy dust buildup
Heat pump evaporator coil with heavy dust buildupHVAC blower motor with airflow chart and wiring visibleSplit heat pump unit with insulated refrigerant lineSplit heat pump blower wheel with dust buildup
Daniel Heady
Solace Heating and Air performed routine preventive maintenance on a split heat pump system in Hendersonville, Tennessee. Technicians inspected electrical components, verified refrigerant pressures, cleaned coils, checked airflow and filters, ensured proper condensate drainage, and tested safety controls to maintain system performance and efficiency.
Check-in Location
Electrical breaker panel with labeled circuit breakers
Electrical breaker panel with labeled circuit breakersHeat pump unit wiring schematic label on metal panelHeat pump indoor coil and duct inspection viewHVAC connector plug with multiple colored wires
Jose Acevedo
Solace Heating and Air performed heating system maintenance in Spring Hill, Tennessee. The technician inspected system controls, ignition components, and gas heating stages. They confirmed proper system operation and replaced the air filter. The technician also noted corrosion in the breaker box and discussed related repair options with the client.
Check-in Location
Bryant heating unit with maintenance tools outdoors
Bryant heating unit with maintenance tools outdoorsOutdoor electrical breaker box with corrosion and wiringUV light tubes inside HVAC air handler unit panelHVAC heating coil close-up during maintenance check
Jose Acevedo
Solace Heating and Air completed heating system maintenance in Brentwood, Tennessee. Technicians inspected two systems and found one with a corroded heat exchanger causing safety issues. The affected system was shut down. The team informed the customer of repair options. The other systems remained operational after inspection.
Check-in Location
Heat exchanger showing corrosion hole damage
Heat exchanger showing corrosion hole damageRusty gas pipe and fittings near HVAC unit outsideGas furnace with open panel and rusted heat exchanger
Adam Fleming
Solace Heating and Air completed heating maintenance on a package heat pump in Clarksville, Tennessee. The service involved inspecting system components and verifying proper operation to support efficient heating during colder months.
Check-in Location
Jose Acevedo
Solace Heating and Air completed heating maintenance on four systems and one water heater in Nashville, Tennessee. Technicians inspected motors, capacitors, gas components, and airflow. All systems operated correctly. The team discussed filter care, system age, and UV system options to support air quality. They recommended a future service for a second water heater.
Check-in Location
Heating system unit in attic with inspection equipment
Heating system unit in attic with inspection equipmentWater heater igniter rod on wooden floor with tool nearbyGas furnace inspection sight glass showing active blue flame
Nick Panucci
Solace Heating and Air cleaned the blower wheel on a downstairs package unit and replaced the blower capacitor and contactor on an upstairs split system in White House, Tennessee.
Check-in Location
Package unit blower wheel and O.D. fan capacitor
Package unit blower wheel and O.D. fan capacitorPackage unit blower wheel and dirty housing parts laid outPackage unit blower wheel and housing parts cleaningPackage unit blower wheel and housing parts on groundPackage unit blower wheel and motor on pavement
Nick Panucci
Solace Heating and Air completed heating maintenance on a 2-year-old, 4-ton Lennox heat pump package unit in White House, Tennessee. The technician inspected the unit and checked the ductwork for proper function.
Check-in Location
Jose Acevedo
Solace Heating and Air repaired a no-heat issue in a downstairs system in Fairview, Tennessee. The technician fixed a loose wire, tested heating function, and identified a failing inducer motor. The customer approved warranty repairs and gas line insulation to address corrosion concerns. Parts will be ordered, and a diagnostic discount will apply after final payment.
Check-in Location
Inducer motor temperature check on furnace system
Inducer motor temperature check on furnace systemInducer motor shaft and corroded gas line connectionRusty gas line and HVAC wiring near furnace unit
Jose Acevedo
Solace Heating and Air completed heating system maintenance and capacitor replacement in Nashville, Tennessee. Technicians inspected downstairs and upstairs HVAC systems, verified proper heat operation, replaced a low-tolerance capacitor, and reset the thermostat. The new capacitor includes a one-year parts and labor warranty. Indoor air quality upgrades and surge protection were also discussed with the customer.
Check-in Location
Gas furnace burners ignited inside heating system compartment
Gas furnace burners ignited inside heating system compartmentUpstairs condenser with new dual capacitor installedFlame sensor rod removed from HVAC system unitFlame sensor rod and screws on HVAC unit panelGas line piping connected to outdoor HVAC unit
Jose Acevedo
Solace Heating and Air completed heating system maintenance in Fairview, Tennessee. Technicians inspected two units—a downstairs gas furnace and an upstairs wall-mounted heat pump. They checked motors, controls, capacitors, and heating performance. No issues were found. The homeowner enrolled both systems and a water heater in a maintenance plan.
Check-in Location
80% furnace burner with wiring and blue flames
80% furnace burner with wiring and blue flamesHeat pump evaporator coil with tubing and wiring
Nick Panucci
Solace Heating and Air inspected a furnace in Madison, Tennessee and found the inducer fan motor seized. The technician provided a quote for warranty-covered repairs.
Check-in Location
Jose Acevedo
Solace Heating and Air repaired a heating system in Brentwood, Tennessee. Technicians identified a failure in flame detection due to a poor ground connection on the ignition system. They corrected the wiring and restored proper heating. The service was completed under the existing parts and labor warranty.
Check-in Location
Ignition system with wiring connections inside furnace unit
Nick Panucci
Solace Heating and Air completed heating system maintenance on a heat pump package unit in Madison, Tennessee. The team replaced a faulty dual run capacitor and provided an estimate for replacing damaged ductwork caused by crawlspace moisture.
Check-in Location
Jose Acevedo
A technician in Smyrna, Tennessee inspected a customer’s gas furnace and water heater following a high gas usage report. The furnace and electric water heater showed no faults. A gas leak was found at the meter shut-off connection. The issue was documented and referred to the gas company for further action.
Check-in Location
Gas meter shut off leak detection near furnace system
Gas meter shut off leak detection near furnace systemGas meter shutoff leak with temporary tape sealGas meter shutoff valve with visible leak bubbles
Jose Acevedo
Solace Heating and Air inspected a furnace with no heat in the master bedroom in Nashville, Tennessee. The technician found a pressure switch failure and recommended replacing the inducer motor and servicing the pressure switch. The system was reset and is currently heating without further electrical issues.
Check-in Location
Furnace gas burners with blue flame and wiring connections
Furnace gas burners with blue flame and wiring connectionsFurnace ductwork and insulated vent in attic spaceFurnace pressure switch with wiring connectionsFurnace exhaust vent pipe installation in attic spaceHoneywell thermostat displaying current room temperature
Jose Acevedo
A technician in Spring Hill, Tennessee inspected a home HVAC system that was not producing heat. The blower and heater kit were continuously running due to stuck sequencers. After assessing the system and thermostat, a replacement quote was scheduled due to repair costs and system age. The system remained non-functional following the visit.
Check-in Location
Furnace sequencers stuck causing continuous heating
Furnace sequencers stuck causing continuous heatingFurnace sequencers stuck with wiring and fuses visibleFurnace metal cover with burn marks and holeHeating unit with open access panel in laundry roomHeater coil and rusted pipes in HVAC system cavity
Jose Acevedo
Solace Heating and Air completed a no-heat repair in Franklin, Tennessee. The technician replaced the control board, re-wired the system using manufacturer schematics, and tested its function. The heating system now operates correctly, with no reported issues. All repairs were covered under warranty, and the system passed a final inspection before departure.
Check-in Location
Control board and wiring inside furnace with lit indicators
Control board and wiring inside furnace with lit indicatorsEcobee thermostat displaying heating mode at 67°FHVAC floor vent temperature reading device on vent grille
Nick Panucci
Solace Heating and Air inspected a 10-year-old gas package system with no heat in Madison, Tennessee. Technicians found the inducer fan sticking intermittently, which prevented the heating system from completing its startup process.
Check-in Location
Jose Acevedo
Solace Heating and Air performed single-unit heating maintenance in Goodlettsville, TN, verifying optimal system performance. The technician provided a detailed report with efficiency readings and tailored homeowner recommendations.
Check-in Location
Heat pump unit with maintenance tools outdoors
Heat pump unit with maintenance tools outdoorsHeating unit maintenance in attic with ductworkDigital multimeter measuring HVAC system temperatureHVAC blower fan close-up with label and dust buildupHeating duct temperature check with digital thermometer
Nick Panucci
Solace Heating and Air performed seasonal heating maintenance in White House, Tennessee. The service included inspecting and servicing heating equipment to improve performance and ensure safe operation during colder months.
Check-in Location
Heat pump unit outdoors with connected piping and controls
Nick Panucci
Solace Heating and Air completed heating maintenance on four systems and replaced air filters in Hendersonville, Tennessee. This service helps ensure reliable performance and efficient operation during colder months.
Check-in Location
Commercial rooftop HVAC unit with metal ductwork
Commercial rooftop HVAC unit with metal ductworkLennox rooftop heating unit with ductwork maintenance
Nick Panucci
Solace Heating and Air replaced a whole home humidifier in Gallatin, Tennessee. The team removed the old unit and installed a new system to support consistent indoor humidity levels. This service helps maintain healthier air quality and improves comfort throughout the house.
Check-in Location
Nick Panucci
Solace Heating and Air completed HVAC maintenance and repair in Nashville, Tennessee. The team serviced one system, replaced a faulty blower capacitor, fixed a sticking pressure switch, and adjusted the gas pressure for proper operation.
Check-in Location
Goodman HVAC unit exterior near wooden fence and siding
Goodman HVAC unit exterior near wooden fence and sidingAir conditioner outdoor unit with fan and grille in MemphisLennox furnace blower capacitor and pressure switch repairBlower capacitor on HVAC system in metal housingPressure switch on HVAC furnace system
Jose Acevedo
Solace Heating and Air completed a heating system maintenance in Smyrna, Tennessee. The technician inspected motors, capacitors, and gas components. They replaced a faulty inducer motor draft capacitor under warranty. After repairs, the technician tested the unit to confirm proper heating function.
Check-in Location
Gas furnace burner flame inside heating system
Gas furnace burner flame inside heating systemInducer motor capacitor testing on heating unit with meter
Nick Panucci
Solace Heating and Air inspected three HVAC systems for a new homeowner in White House, Tennessee. The team checked system performance and condition to ensure proper function and safety throughout the home.
Check-in Location
Jose Acevedo
Solace Heating and Air completed a full home heating system maintenance in Brentwood, Tennessee. Technicians inspected motors, boards, capacitors, gas heating parts, thermostat settings, and air filtration. All components operated correctly. They advised replacing the air filter every 30 to 90 days for better system efficiency and airflow.
Check-in Location
Gas furnace blower wheel showing dust buildup
Gas furnace blower wheel showing dust buildupGas furnace pressure switch and wiring maintenanceGas furnace burner flames during heating maintenance checkGas furnace heating system with ventilation pipes
Nick Panucci
A technician in Madison, Tennessee replaced a shorted safety switch and secured multiple loose connections on both low and high voltage lines. This service helped restore proper function and improve the safety of the electrical system.
Check-in Location
Lennox HVAC unit with secured electrical connections
Lennox HVAC unit with secured electrical connectionsLennox air conditioner unit with fan grille outdoorsSafety switch electrical connections on HVAC piping
Daniel Heady
Solace Heating and Air performed maintenance on a split gas HVAC system in Goodlettsville, Tennessee. All components passed functional tests, and the technician advised the homeowner on seasonal upkeep to optimize system efficiency.
Check-in Location
Split system outdoor condenser unit on concrete pad
Split system outdoor condenser unit on concrete padSplit gas furnace with exposed components and ductwork
Daniel Heady
Solace Heating and Air completed a single-unit heating system maintenance in Springfield, Tennessee. The technician confirmed the unit was heating without issues. They inspected the heat exchanger and found it in good condition. The technician reviewed the system status and findings with the homeowner.
Check-in Location
Heat pump unit with inspection tool on top outdoors
Heat pump unit with inspection tool on top outdoorsHeat exchanger inside HVAC unit, rust and wear visibleHeat exchanger with electrical wiring and inspection light inside unit
Tyler White
Solace Heating and Air installed a 2.5-ton split HVAC system in Spring Hill, Tennessee. This installation supports reliable temperature control and energy efficiency for residential use.
Check-in Location
Lennox HVAC furnace and ductwork installation in attic
Lennox HVAC furnace and ductwork installation in atticGas furnace installation in attic with ductworkFurnace and air handler unit in attic installation
Daniel Heady
Solace Heating and Air completed a one-unit HVAC maintenance in White House, Tennessee. A technician inspected the system, confirmed all components were functioning properly, and reviewed the results with the homeowner.
Check-in Location
HVAC control wiring bundle with color-coded wires
HVAC control wiring bundle with color-coded wiresElectrical disconnect box on brick exterior wallCopper refrigerant lines and coil in HVAC unit
Daniel Heady
Solace Heating and Air completed a maintenance check on a single HVAC unit in Springfield, Tennessee. The system operated correctly in both heating and cooling modes. The technician reviewed the service findings with the homeowner.
Check-in Location
Furnace burner assembly with label and nozzle tubes
Furnace burner assembly with label and nozzle tubesFurnace interior with wiring and capacitor maintenanceComfortmaker rooftop HVAC unit with open control panel
Daniel Heady
Solace Heating and Air inspected an air conditioning unit in Madison, Tennessee that had shut down due to high pressure. The technician found an outdoor fan malfunction and traced the problem to a loose factory-installed plug. After securing the connection, the unit resumed proper cooling.
Check-in Location
HVAC unit electrical plug connection inside metal housing
HVAC unit electrical plug connection inside metal housingHVAC unit factory wiring plug with loose connectionOutdoor AC unit electrical panel open with tools on top
Daniel Heady
Solace Heating and Air inspected a package heat pump in Hendersonville, Tennessee. The system had no cooling due to a complete refrigerant loss. A complimentary leak search revealed a leak in the indoor coil. The technician showed the homeowner the issue and discussed available repair options.
Check-in Location
Heat pump circuit breakers on exterior wall panel
Heat pump circuit breakers on exterior wall panelHeat pump data plate showing model and specs
Daniel Heady
Solace Heating and Air completed a one-unit HVAC maintenance service in White House, Tennessee. Technicians confirmed all system components functioned properly, secured all electrical connections, and verified correct operation.
Check-in Location
Air conditioner unit with drill and tool bags outdoors
Air conditioner unit with drill and tool bags outdoorsHVAC air handler coil with maintenance labelLennox furnace unit with secured electrical connections
Daniel Heady
Solace Heating and Air completed a one-unit HVAC maintenance in White House, Tennessee. The technician confirmed proper heating and cooling performance. They reviewed the checklist with the homeowner and explained each system function clearly.
Check-in Location
Electric breaker panel on brick wall with conduit
Electric breaker panel on brick wall with conduitAmerican Standard HVAC unit maintenance with tools on topHVAC blower motor housing with wiring connectionsHVAC contactor wiring with dust buildup in panel
Daniel Heady
A technician in White House, Tennessee repaired a split heat pump that was not cooling properly. The issue was caused by a tripped overflow switch in the drain pan. The drain system had two traps, so a vent was added to allow proper water flow and prevent future shutdowns.
Check-in Location
Daniel Heady
Solace Heating and Air completed a one-year maintenance check on an HVAC system in White House, Tennessee. The system includes a UV light and surge protection. Technicians confirmed all components are functioning properly.
Check-in Location
Daniel Heady
Solace Heating and Air completed residential HVAC maintenance in Hendersonville, Tennessee. The technician confirmed system operation and recommended replacing an 11-year-old contactor. A UV air sanitation system was also suggested to help reduce microbial growth inside the unit.
Check-in Location
Daniel Heady
Solace Heating and Air completed residential HVAC maintenance in Springfield, Tennessee. The technician inspected the system and confirmed it was operating correctly. The homeowner approved replacement of a charged hot surface igniter and installation of a media air cleaner. The team will return to complete the upgrades once the parts arrive.
Check-in Location
Daniel Heady
Solace Heating and Air completed maintenance on a two-system HVAC setup in White House, Tennessee. Both units are functioning properly with active UV lights and clean components. The technician discussed a filtration upgrade to a polarized filter, but the customer chose to keep the current disposable filters.
Check-in Location
Daniel Heady
Solace Heating and Air provided a quote for ductwork repairs in Fairview, Tennessee. The technician identified the need to replace the return duct and discussed the proposed solutions with the homeowner.
Check-in Location
Daniel Heady
Solace Heating and Air inspected a split heat pump system in Hendersonville, Tennessee after a cooling issue was reported. Technicians identified a leaking evaporator coil in the attic. The coil was under parts warranty. The team reviewed repair options and provided a detailed estimate for the necessary repairs.
Check-in Location
Evaporator coil leaking in attic HVAC system
Evaporator coil leaking in attic HVAC systemGoodman outdoor heat pump unit with tools on top
Tyler White
Solace Heating and Air replaced an older R410a Goodman split system with a 2.5-ton Trane heat pump using R454b refrigerant in Murfreesboro, Tennessee. This upgrade supports improved energy efficiency and modern refrigerant standards for residential climate control.
Check-in Location
Goodman outdoor air conditioner unit with clipboard
Goodman outdoor air conditioner unit with clipboardTrane 2.5 ton heat pump outdoor unit installation2.5 ton Trane heat pump outdoor units with refrigerant linesHeat pump air handler installation in attic space
Tyler White
Solace Heating and Air replaced an older R410A Goodman split system with a 2.5-ton Trane heat pump using R454B refrigerant in Murfreesboro, Tennessee. The new system improves efficiency and supports modern refrigerant standards.
Check-in Location
Trane heat pump air handler installed in attic space
Trane heat pump air handler installed in attic spaceGoodman air conditioner unit with inspection clipboard2.5 ton Trane heat pump outdoor unit on patioTrane heat pump outdoor unit with insulated refrigerant linesTrane 2.5 ton heat pump attic split system installation
Daniel Heady
Solace Heating and Air completed heating maintenance on a split gas system in Dickson, Tennessee. Technicians inspected all components and confirmed proper operation. They also recommended installing a UV sanitation system to improve indoor air quality.
Check-in Location
Lennox gas heating furnace with PVC vent pipes
Daniel Heady
Solace Heating and Air inspected two mini split units in a basement in Springfield, Tennessee. One unit had a clogged drain, which was cleared. The other was low on refrigerant, and the homeowner is reviewing a replacement estimate.
Check-in Location
Daniel Heady
Solace Heating and Air completed commercial heating maintenance on two systems in Madison, Tennessee. The team checked all electrical connections and refrigerant components. They documented the service and sent estimates and system information to the building owner via email.
Check-in Location
Commercial heating unit electrical and refrigerant inspection
Commercial heating unit electrical and refrigerant inspectionCommercial heating unit electrical and refrigerant components
Daniel Heady
Solace Heating and Air completed a one-unit HVAC maintenance in Springfield, Tennessee. The technician tightened all connections, cleaned ignition components, and confirmed all parts were working correctly. The homeowner received a full review of the service and system operation.
Check-in Location
Daniel Heady
Solace Heating and Air completed maintenance on two HVAC systems and cleaned two mini-split units in Nashville, Tennessee. Technicians disassembled an older mini-split to wash the blower wheel and clean all internal components. All systems were inspected and confirmed to operate without issues.
Check-in Location
American Standard air conditioner with technician tools nearby
American Standard air conditioner with technician tools nearbyOutdoor air conditioner condenser unit on mulch bedMini split HVAC unit in attic with ductworkFurnace system with Pro Pleat air filter installed
Daniel Heady
Solace Heating and Air completed maintenance on two gas heating units in Smyrna, Tennessee. Both units operated correctly with no issues. Technicians checked all components for tightness and verified proper function.
Check-in Location
Daniel Heady
Solace Heating and Air completed a one-unit HVAC maintenance in Spring Hill, Tennessee. The technician confirmed proper heating and cooling, tightened all connections, cleaned operational components, and ensured clear airflow. The visit included a full system check and walkthrough with the homeowner.
Check-in Location
Lennox air conditioner unit with toolbag on top
Lennox air conditioner unit with toolbag on topElectrical circuit breaker panel with safety labelsAir handler coil cleaned and connections tightenedHVAC blower motor and capacitor with wiring connections
Daniel Heady
Solace Heating and Air completed a maintenance service on a gas package unit in Spring Hill, Tennessee. The team inspected all connections, ensured clean ignition components, verified system readings, and confirmed proper operation. The unit, under one year old, showed no issues during the check. The technician reviewed the findings with the homeowner.
Check-in Location
Gas package unit control board and wiring inside maintenance
Daniel Heady
Solace Heating and Air completed a one-unit HVAC maintenance in Madison, Tennessee. The technician confirmed the system was heating and cooling correctly and reviewed the findings with the homeowner.
Check-in Location
Air conditioner unit with HVAC tools on grass
Daniel Heady
Solace Heating and Air completed maintenance on two HVAC units in Springfield, Tennessee. Technicians confirmed both systems were working properly and reviewed all service details with the homeowner.
Check-in Location
HVAC contactor with wiring inside metal panel
HVAC contactor with wiring inside metal panelBlower wheel assembly inside HVAC unit cabinetAir conditioning unit with maintenance tools outdoorsTrane outdoor HVAC unit on concrete slab near brick wall
Daniel Heady
Solace Heating and Air completed a one-unit HVAC maintenance in Springfield, Tennessee. The unit operated correctly but showed heavy dirt and bacterial buildup. Technicians advised installing a UV light system and performing a full internal cleaning. All findings were discussed with the homeowner.
Check-in Location
HVAC unit dirty evaporator coils with dust buildup
HVAC unit dirty evaporator coils with dust buildupHVAC blower housing with dirt and debris buildupHVAC evaporator coil clogged with dirt buildupFurnace blower motor and control board with wiring
Daniel Heady
Solace Heating and Air completed seasonal HVAC maintenance in Hendersonville, Tennessee. The technician confirmed the system heats and cools correctly and discussed performance with the homeowner. An upgrade to the filter system was recommended for improved air quality and efficiency.
Check-in Location
American Standard HVAC unit outdoor condenser coil section
American Standard HVAC unit outdoor condenser coil sectionHeat pump unit outside brick home with grass lawnFurnace heat exchanger showing signs of wear
Daniel Heady
Solace Heating and Air completed a one-unit HVAC maintenance in White House, Tennessee. The technician confirmed the system is heating and cooling correctly and reviewed findings with the homeowner. The homeowner will decide on any further action after discussion.
Check-in Location
Outdoor HVAC condenser unit at brick house exterior
Daniel Heady
Solace Heating and Air completed heat pump maintenance in White House, Tennessee. The technician confirmed the unit cooled correctly but noted high head pressure during heating. Due to warm weather, full testing was limited. The technician also explained how a UV light and polarized media air filtration system can support indoor air quality.
Check-in Location
Heat pump diagnostic meter measuring temperature near unit
Heat pump diagnostic meter measuring temperature near unitHeat pump unit electrical wiring testing with multimeterHeat pump air handler unit in attic installationHeat pump unit wiring and electrical connector close-up
Daniel Heady
Solace Heating and Air completed maintenance on one HVAC unit in White House, Tennessee. The system operated correctly in both heating and cooling modes. The technician discussed system performance with the homeowner and suggested trimming nearby bushes to improve airflow and accessibility.
Check-in Location
HVAC unit obscured by overgrown bushes near brick wall
HVAC unit obscured by overgrown bushes near brick wallHVAC unit with tool bag on top near bushesAir conditioner evaporator coil and drip pan close-upHVAC blower wheel with dust buildup close-up
Daniel Heady
Solace Heating and Air completed routine maintenance on a gas package unit in White House, Tennessee. The technician confirmed the system heated and cooled correctly and discussed the findings with the homeowner.
Check-in Location
Gas package unit burner and wiring inspection
Gas package unit burner and wiring inspectionGas package unit maintenance with open panel and tools
Tyler White
Solace Heating and Air installed a Trane 5-ton gas package unit in Nolensville, Tennessee. This unit combines heating and cooling in one system, providing efficient climate control for larger homes or commercial spaces. The installation supports consistent temperature management and improved energy use throughout the year.
Check-in Location
Trane 5-ton gas package unit installed outdoors
Trane 5-ton gas package unit installed outdoorsTrane gas package unit with electrical and gas connectionsTrane 5-ton gas package unit installed outside brick homeTrane 5 ton gas package unit exterior installation
Daniel Heady
Solace Heating and Air inspected an AC system in Nolensville, Tennessee, during a no-cool issue. The technician found low refrigerant and a leak in the evaporator coil. They showed the homeowner the source of the problem and provided a detailed repair estimate during a free second opinion visit.
Check-in Location
Evaporator coil leak on Lennox outdoor unit
Daniel Heady
Solace Heating and Air installed a dual bulb UV system to improve indoor air quality in Clarksville, Tennessee. The technician completed the installation, reviewed the setup with the homeowner, and confirmed their approval. This system includes a lifetime warranty for added value.
Check-in Location
Pin Photo
Pin PhotoPin PhotoPin PhotoPin Photo
Daniel Heady
Technicians completed a maintenance tune-up and installed a UV light system on a single HVAC unit in Clarksville, Tennessee. The system was cooling properly at the time of service. The team reviewed the work and system performance with the homeowner to ensure full understanding.
Check-in Location
Pin Photo
Pin PhotoPin Photo
Daniel Heady
Solace Heating and Air inspected two malfunctioning HVAC units at a hotel in Clarksville, Tennessee. Technicians identified grounded compressors in both systems. They documented the issue and sent repair estimates to the building’s business manager for review.
Check-in Location
Pin Photo
Pin PhotoPin Photo
Daniel Heady
Solace Heating and Air inspected a non-working air conditioning system in Smyrna, Tennessee. Technicians identified a failed ECM blower motor and reviewed repair options with the homeowner. The homeowner requested a quote for a full unit replacement, which the team scheduled for the following Monday afternoon.
Check-in Location
Pin Photo
Pin PhotoPin PhotoPin Photo
Daniel Heady
Solace Heating and Air inspected an AC unit in Nashville, Tennessee that was not cooling. Technicians found a major refrigerant leak at the evaporator coil caused by a previous installation. They documented the issue with photos and video and shared repair details with the office for communication with the property management firm.
Check-in Location
Pin Photo
Pin PhotoPin Photo
Daniel Heady
A technician in Hermitage, Tennessee inspected an upstairs HVAC unit that was not cooling. The system had lost refrigerant due to a leak in the outdoor coil. The technician identified the issue and discussed repair options with the homeowner.
Check-in Location
Pin Photo
Pin PhotoPin Photo
Daniel Heady
A technician inspected an HVAC system in White House, Tennessee. The central air was restored during testing, but the thermostat had failed. The technician also identified serious issues with the gas heating system and discussed repair options with the homeowner before the upcoming heating season.
Check-in Location
Daniel Heady
Solace Heating and Air replaced a malfunctioning downstairs HVAC unit in White House, Tennessee. The system had low refrigerant and a leak at the evaporator coil. After reviewing options, the homeowner chose a full unit replacement to restore cooling.
Check-in Location
Pin Photo
Pin PhotoPin Photo
Daniel Heady
Solace Heating and Air cleared a clogged AC drain and corrected an uneven unit installation in Madison, Tennessee. The technician inspected the system and explained the issues to the homeowner. This service improved drainage and helped the unit operate more effectively.
Check-in Location
Pin Photo
Daniel Heady
Solace Heating and Air inspected a commercial HVAC unit in Nashville, Tennessee. Technicians identified a failed TXV as the cause of a cooling issue. They discussed the necessary repairs directly with the business management to plan the next steps.
Check-in Location
Pin Photo
Daniel Heady
Solace Heating and Air inspected ductwork and airflow in White House, Tennessee. Technicians found no issues and gave recommendations to improve temperature consistency between rooms. The assessment supported better indoor comfort without immediate repairs.
Check-in Location
Check-ins - Reviews - Content - Ranking

It Was a Pleasure Serving You!



×