Our Maintenance Plans

Solace Heating and Air provides cooling system maintenance in Memphis, Tennessee. They clean condenser units, check capacitors, inspect refrigerant levels, measure compressor and motor electrical performance, flush drain lines, and verify thermostat operation. Their service ensures proper airflow, safe operation, and early detection of potential issues.

Solace Heating and Air performed a full HVAC inspection in Memphis, Tennessee. They tested electric components, cleaned blower and coils, replaced air filters, and confirmed the unit operates normally. They also recommended installing a surge protector and indoor air quality products.

Solace Heating and Air provides no heat service calls in Olive Branch, Mississippi. They diagnose heating system issues and perform necessary repairs to restore warmth efficiently. Customers receive prompt and clear service to address heating failures in their homes or businesses.

Solace Heating and Air performed comprehensive cooling maintenance in Memphis, TN, including cleaning the condenser to restore airflow, verifying capacitors and refrigerant charge for optimal cooling, measuring compressor and fan amp draw to ensure electrical safety, flushing the condensate drain, inspecting coils and connections, confirming thermostat function, and evaluating system performance to prevent breakdowns and enhance energy efficiency.

Solace Heating and Air in Memphis, TN inspected and tested electrical connections for three HVAC systems. They replaced two AprilAire filters upstairs and one 20x25x1 filter downstairs. They installed an overflow switch in the master bedroom system and advised adding a drain trap. All units operate normally.

Solace Heating and Air serviced HVAC systems in Memphis, Tennessee, inspecting electrical connections and replacing a faulty capacitor in the downstairs unit. They confirmed the unit runs normally and noted a bullet hole in the upstairs condenser coil, recommending repair by the original contractor.

Solace Heating and Air provided cooling maintenance in Memphis, TN. They cleaned the condenser unit, checked capacitors, and inspected refrigerant levels. They measured compressor and fan motor amp draw, flushed the drain line, and verified thermostat operation. The service included checking electrical connections, system temperature, and overall system condition.

Solace Heating and Air performed an AC service call in Memphis, TN, diagnosing system faults and restoring optimal cooling efficiency. They ensured reliable operation for homeowners during peak summer heat.

Solace Heating and Air performed cooling maintenance in Memphis, TN. They cleaned the condenser unit, checked capacitors, inspected refrigerant levels, and measured electrical amp draw. They flushed the condensate drain, checked coils, verified thermostat function, and tested system startup and safety components to ensure efficient operation.

Solace Heating and Air inspected electrical connections and components, identifying capacitor issues in the condenser fan and compressor in Memphis, TN. They verified the filter, evaporator coil, and condenser coil condition, ensured the unit runs and cools normally, and provided estimates for a dual run capacitor and indoor air quality products.

Solace Heating and Air inspected electrical connections and components of two HVAC systems in Oxford, Mississippi. They replaced customer-supplied filters, checked blower wheels, evaporation coils, and condenser coils. Both units operate normally. They also recommended installing two float switches for system protection.

Solace Heating and Air serviced an HVAC unit in Memphis, TN, resolving a lockout caused by a faulty coil temperature sensor. The team reset the defrost control board to restore normal cooling function and provided an estimate to replace the sensor. The unit remains under warranty until 2027.

Solace Heating and Air serviced an HVAC system in Memphis, TN, checking electrical components and replacing a 20x25x1 filter. They cleaned the condenser coil, inspected the blower wheel and A-coil, and confirmed the system’s normal cooling operation. They also recommended indoor air quality products.

Solace Heating and Air inspected and tested all electrical connections and components in Memphis, TN. They cleaned condenser coils, filters, blower wheels, and A-coils. The systems were operating and cooling normally. They recommended replacing the downstairs condenser contactor and suggested new indoor air quality products.

Solace Heating and Air serviced HVAC systems in Memphis, TN by inspecting electrical connections and replacing capacitors. They tested components, cleaned filters and blower wheels, checked coils for rust or leaks, replaced a downstairs air filter, and confirmed both systems were operating and cooling properly.

Solace Heating and Air inspected all electrical connections and components in Memphis, TN. They tested blowers and filters, replaced one 16x25x1 filter, checked for carbon monoxide, and confirmed both heating systems operate normally.

Solace Heating and Air provides duct cleaning estimates in Memphis, Tennessee. They evaluate air ducts to determine cleaning needs, improving air quality and system efficiency. Their service helps identify buildup and blockages for better heating and cooling performance.

Solace Heating and Air in Memphis, TN inspected and tested all electrical connections and components. They replaced a 20x25x1 filter, checked the blower wheel, coils, and carbon monoxide levels. The heating system operated normally, and no issues were found with electrical parts.

Solace Heating and Air performed a heating system inspection in Memphis, TN. They tested electrical connections and components, replaced the filter, checked the blower wheel, and measured carbon monoxide levels. They also installed a coil overflow switch to ensure safe and efficient operation.

Solace Heating and Air provided dryer vent cleaning in Hernando, Mississippi. They cleared the vent from both top and bottom sides, then tested the dryer to confirm proper airflow and heating function.

Solace Heating and Air performed an HVAC system inspection in Memphis, Tennessee. They examined the operation of heating and cooling equipment to ensure it functions correctly and efficiently. This service helps maintain system performance and prevent potential issues.

Solace Heating and Air in Bartlett, Tennessee inspected electrical connections and components of both a split system and minisplit. They tested filters, blower wheels, condenser coils, and a-coils. Both units operate within manufacturer specs and cool properly. A pan overflow switch and indoor air quality products were recommended.

Solace Heating and Air in Memphis, TN replaced all 16x25x1 air filters and inspected three a-coils, condenser coils, and blower wheels, confirming good condition. They checked electrical components, found a damaged capacitor on the downstairs unit, and recommended its replacement along with pan overflow switches for both units.

Solace Heating and Air serviced HVAC systems in Olive Branch, MS. They tested electrical connections and replaced both dual run capacitors. They cleaned blower wheels, filters, and a-coils. After inspection, both systems operated normally for effective cooling and performance.

Solace Heating and Air performed cooling maintenance in Memphis, Tennessee. The service included cleaning the condenser unit, inspecting electrical components, checking refrigerant levels, flushing the drain line, and verifying thermostat function to ensure efficient and safe system operation while preventing future breakdowns.

Solace Heating and Air performed heating maintenance in Memphis, TN, inspecting the furnace heat exchanger for cracks, checking air filters, testing safety switches, inspecting igniters, measuring blower motor amperage, verifying 15-minute fault-free operation, and testing smoke and carbon monoxide detectors.

Solace Heating and Air replaced an old attic fan with a new one in Memphis, Tennessee. They ensured proper installation to improve attic ventilation and air circulation. This service enhances home comfort by maintaining efficient airflow and reducing indoor heat buildup.

A technician in Germantown, Tennessee inspected an HVAC system, tested all electrical components, and confirmed performance met manufacturer specifications. The filter and blower wheel were clean. Carbon monoxide levels were safe. The system operated normally, and the technician suggested indoor air quality upgrades.

A technician replaced a polarized media air cleaning filter in Memphis, Tennessee. This service improves indoor air quality by ensuring the air filtration system functions correctly. Regular filter changes support cleaner air and maintain HVAC system efficiency.

Solace Heating and Air inspected a heating system in Memphis, Tennessee. The technician tested electrical components, adjusted gas pressure, and confirmed normal system operation. The filter and blower wheel were in good condition. No carbon moisture was detected. Estimates were provided for a surge protector and indoor air quality solutions.

Solace Heating and Air inspected two heating systems in Bartlett, Tennessee. The technician replaced a failing downstairs blower capacitor, checked blower wheels and filters, and recommended cleaning the downstairs blower. Both systems were tested for carbon monoxide and confirmed to be operating and heating normally.

Solace Heating and Air inspected an HVAC unit in Memphis, Tennessee. The technician tested electrical components, filter, blower wheel, and evaporator coil. All parts met manufacturer specifications and were clean. The unit functioned normally. The technician suggested installing a surge protector and upgrading indoor air quality products for added system protection and efficiency.

A technician in Millington, Tennessee inspected an HVAC system, tested electrical components, replaced two 16x25x1 air filters, and confirmed safe carbon monoxide levels. The system operated normally. The technician recommended adding a coil overflow switch, surge protector, and indoor air quality products to improve system safety and performance.

Solace Heating and Air completed a heating system maintenance in Oakland, Tennessee. The technician inspected the furnace heat exchanger, tested safety switches, verified sensor function, measured blower motor amp draw, and confirmed system operation. The service also included checking air filters and testing all smoke and carbon monoxide detectors for safety.

Solace Heating and Air inspected a heating system in Germantown, Tennessee. The technician tested electrical components, replaced a 16x25x1 air filter, confirmed safe carbon monoxide levels, and verified normal operation. The blower wheel was clean. The technician also discussed available indoor air quality products.

Solace Heating and Air completed a no-heat service call in Memphis, Tennessee. The technician identified and addressed the issue to restore proper heating. This service ensured the home reached a safe and comfortable indoor temperature during colder weather.

Solace Heating and Air completed a full heating system maintenance check in Memphis, Tennessee. The team inspected the furnace heat exchanger, tested safety switches, verified igniter functions, checked filter condition, measured blower motor amp draw, and confirmed proper operation of electric heat strips and smoke detectors. All systems met manufacturer specifications.

Solace Heating and Air completed a furnace maintenance service in Memphis, Tennessee. Technicians inspected the heat exchanger, tested safety switches, checked igniters, measured blower motor current, replaced air filters, confirmed 15-minute operation without faults, and tested smoke and carbon monoxide detectors. This service helps ensure reliable furnace performance and household safety.

Solace Heating and Air completed heat maintenance in Memphis, Tennessee. Technicians inspected the system, cleaned components, and tested performance. This service helps heating systems run efficiently and prevents unexpected breakdowns.

Solace Heating and Air replaced two faulty 15mfd blower capacitors and changed both air filters in Memphis, Tennessee. Technicians inspected all electrical connections, blower wheels, and components. Both systems now run and heat properly.

A technician relit the pilot light on a gas log fireplace in Memphis, Tennessee. This service ensures proper ignition for safe and efficient use of the fire log set during colder months.

Solace Heating and Air responded to an emergency no-heat service call in Memphis, Tennessee. Technicians inspected the system, identified the problem, and restored heat to ensure safe indoor temperatures.

Solace Heating and Air provided emergency no-heat repair service in Memphis, Tennessee. A technician inspected the heating system, identified the issue, and restored heat to ensure proper indoor temperature during cold weather.

A technician in Arlington, Tennessee replaced a faulty high limit switch and a 10mfd blower capacitor. These repairs restored normal heating system function. The technician also recommended replacing the current Nest thermostat with a Sentry or EcoBee model for improved performance.

Solace Heating and Air completed a heating system maintenance service in Bartlett, Tennessee. Technicians inspected the furnace heat exchanger, air filter, safety switches, and ignition components. They tested blower motor performance, confirmed proper system operation, and checked all smoke and carbon monoxide detectors for function and safety.

A technician inspected a fireplace and lit the pilot light in Bartlett, Tennessee. This service confirmed safe operation and restored ignition functionality for the heating system.

Solace Heating and Air inspected three HVAC systems in Germantown, Tennessee. The team tested electrical components, cleaned filters and blower wheels, and confirmed safe operation with no carbon monoxide detected. All systems operated normally. A pan overflow switch was installed on the downstairs unit to prevent water damage.

Solace Heating and Air completed heating system maintenance in Bartlett, Tennessee. Technicians inspected the furnace heat exchanger, tested safety switches and igniters, checked air filter condition, measured blower motor amp draw, and confirmed proper system operation. All home smoke and carbon monoxide detectors were tested for functionality.

Solace Heating and Air completed routine furnace maintenance in Arlington, Tennessee. The technician inspected the heat exchanger, tested safety switches, cleaned the flame sensor, checked the air filter, measured blower motor amp draw, and verified proper system operation. All smoke and carbon monoxide detectors were also tested for functionality.

Solace Heating and Air cleaned the blower wheel assembly and evaporator coil in Bartlett, Tennessee. This service improves airflow and supports reliable system operation by removing dirt buildup that can reduce HVAC performance.

Solace Heating and Air completed a blower wheel assembly and cleaned the evaporator coil in Bartlett, Tennessee. This service helps maintain airflow and improves system efficiency. Regular cleaning of internal components supports better operation and reduces strain on HVAC systems.

Solace Heating and Air adjusted and balanced airflow for a residential HVAC system in Memphis, Tennessee. The service helped optimize indoor air distribution for improved comfort and ventilation across all rooms.

Solace Heating and Air adjusted and balanced airflow throughout a residential home in Memphis, Tennessee. The team ensured consistent air distribution across all rooms to improve comfort and system efficiency.

Solace Heating and Air inspected three HVAC systems in Arlington, Tennessee. Technicians tested electrical components, filters, and blower wheels, all within manufacturer standards. They found no carbon monoxide and confirmed the units operated normally. They recommended installing pan switches on each unit to improve safety.

Solace Heating and Air completed a no-heat service call for a downstairs HVAC system in Memphis, TN, diagnosing and repairing the heating issue to restore comfort during winter months.

Solace Heating and Air completed furnace maintenance in Germantown, Tennessee. The technician inspected the heat exchanger, tested safety switches, examined igniters, measured blower motor amp draw, and confirmed system operation. The team also checked air filters and tested smoke and carbon monoxide detectors to verify safety and performance.

Solace Heating and Air inspected an HVAC unit in Southaven, Mississippi. The technician tested electrical components, cleaned the blower wheel, replaced a 14x25x1 air filter, and checked for carbon monoxide. The system functioned as expected during testing. Thermostat upgrade estimates were provided to the customer.

Solace Heating and Air completed a no-heat service call in Memphis, Tennessee. Technicians identified a failed gas valve and door shut-off switch. They replaced the gas valve and placed an order for a new door switch to restore proper function to the heating system.

Solace Heating and Air inspected two heating systems in Memphis, Tennessee. Technicians tested electrical components, blower wheels, and filters. They confirmed all parts met manufacturer standards. They also checked for normal system operation and carbon monoxide levels. Both units are functioning and heating properly.

Solace Heating and Air inspected a heating system in Memphis, Tennessee. The technician tested electrical components, verified safe carbon monoxide levels, confirmed clean filters and blower wheel, and ensured the unit operated correctly. A new blower capacitor was recommended along with optional indoor air quality products and a maintenance plan.

Solace Heating and Air inspected a heat mode failure in a package unit in Covington, Tennessee. The technician tested system cycling, flame sensor, blower amp draw, evaporator coil cleanliness, capacitor readings, limit switches, air filters, and temperature differential. After 35 minutes of monitoring, the system was confirmed to operate normally.

Solace Heating and Air adjusted the thermostat temperature on a communicating rooftop gas package unit in Germantown, Tennessee. This service ensures accurate climate control and optimal system performance for the building.

Solace Heating and Air performed a gas fireplace inspection in Germantown, Tennessee. The technician checked components for safety, confirmed proper ventilation, and ensured the unit operated efficiently. This service helps maintain safety and heating performance during colder months.

Solace Heating and Air completed a heating system maintenance service in Bartlett, Tennessee. The technician inspected the furnace heat exchanger, tested safety switches, checked the air filter, verified igniter function, measured motor amp draw, and confirmed a 15-minute system run. All household smoke and carbon monoxide detectors were tested for proper operation.

Solace Heating and Air inspected an HVAC system in Germantown, Tennessee. The technician tested electrical components, replaced a 16x25x1 air filter, checked the blower wheel, and measured carbon monoxide levels. The system operated normally and provided proper heating. The technician also suggested indoor air quality products for improved performance.

Solace Heating and Air sealed a leaking rain shield in Memphis, Tennessee. The technician identified open gaps allowing water beneath the house and applied sealing to stop further intrusions. They inspected the remaining shield to confirm full coverage and prevent future water entry.

Solace Heating and Air inspected six HVAC systems in Collierville, Tennessee. Technicians tested electrical components, replaced filters, checked blower wheels for cleanliness, and measured carbon monoxide levels. All systems operated normally. Staff also recommended indoor air quality products to improve home environment.

Solace Heating and Air cleaned the blower wheel and assembly on a rooftop package unit in Bartlett, Tennessee. This service supports consistent airflow and system efficiency by removing dust and debris from essential ventilation components.

Solace Heating and Air cleaned both rooftop unit blower wheels in Bartlett, Tennessee. This service helps maintain airflow and supports efficient HVAC operation. Regular cleaning prevents dust buildup and improves equipment performance.

Solace Heating and Air cleaned all rooftop unit blower wheels in Bartlett, Tennessee. This service improves airflow and supports consistent HVAC performance in commercial buildings. Regular blower wheel maintenance helps reduce system strain and energy use.

Solace Heating and Air serviced an HVAC unit in Mount Airy, NC. The work included inspecting and likely cleaning the unit's coil and blower wheel to ensure proper airflow and system efficiency. The photos show the coil with some dust accumulation and the blower wheel without its fan blades, indicating maintenance activity.

Solace Heating and Air provided a duct cleaning estimate in Bartlett, Tennessee. The technician shared service options and introduced the homeowner to a smart thermostat system. Estimates were sent by email to support decision-making for potential heating and cooling upgrades.

Solace Heating and Air cleaned the blower wheel on a commercial rooftop HVAC unit in Bartlett, Tennessee, improving airflow consistency and boosting energy efficiency for reliable building climate control.

Solace Heating and Air inspected an HVAC system in Memphis, Tennessee. Technicians tested all electrical connections, cleaned the filter, blower wheel, A-coil, and condenser coil, and confirmed normal heating function. They also recommended indoor air quality products and provided related estimates to the customer.

Solace Heating and Air replaced eight 16x20x2 air filters and cleaned both blower wheels in Memphis, Tennessee. Technicians inspected the evaporator and condenser coils on two HVAC units. Both systems were confirmed to be operating and heating properly.

Solace Heating and Air replaced eight 16x25x1 filters and eight 20x25x1 filters in Memphis, Tennessee. The team inspected the condenser and evaporator coils to confirm they were clean. The HVAC unit is operating and heating normally after service.

Solace Heating and Air completed a quarterly filter change on all rooftop package units as part of a commercial HVAC maintenance service in Bartlett, Tennessee. This service helps maintain consistent airflow and system performance across the property.

Solace Heating and Air performed a heating system maintenance check in Germantown, Tennessee. The technician inspected the furnace heat exchanger for safety, tested key safety switches, examined ignition components, measured blower motor performance, and confirmed proper system operation. All smoke and carbon monoxide detectors in the home were also tested for functionality.

Solace Heating and Air inspected two HVAC systems in Collierville, Tennessee. Technicians tested electrical components, replaced one faulty capacitor, and confirmed filter and blower cleanliness. They verified standard operation and checked for carbon monoxide. Both systems function properly. Estimates for indoor air quality products were sent.

Solace Heating and Air inspected two HVAC systems in Germantown, Tennessee. Technicians checked electrical connections, blower wheels, and Aprilaire 413 filters. All components operated within manufacturer specifications. Both systems were running and heating normally. An estimate was sent for filter replacement.

Solace Heating and Air inspected two HVAC systems in Southaven, Mississippi. The technician replaced faulty blower capacitors, confirmed all other electrical components met specifications, and verified both systems heat properly. Filters and blower wheels were clean. Estimates were provided for new indoor air quality products.

Solace Heating and Air provided heating maintenance in Somerville, Tennessee. Technicians inspected the furnace heat exchanger, tested safety switches, checked the blower motor, and verified system performance. They also replaced air filters and the condenser contactor, and tested smoke and carbon monoxide detectors to ensure safe and reliable operation.

Solace Heating and Air completed furnace maintenance in Covington, Tennessee. The team inspected the heat exchanger, tested safety switches, checked filters and igniters, measured blower motor performance, and verified safe operation. They also replaced a UV bulb in the APCO system, sealed air gaps, and tested smoke and carbon monoxide detectors.

Solace Heating and Air replaced eight 16x20x2 air filters and inspected the evaporator coils, condenser coils, and blower wheels for cleanliness in Bartlett, Tennessee. All components were clean and both units operated normally. Estimates for indoor air quality upgrades were also provided.

Solace Heating and Air replaced filters and cleaned blower wheels on three rooftop units in Memphis, Tennessee. The service improved airflow and supported efficient heating system performance. All units were confirmed operational after maintenance.

Solace Heating and Air performed quarterly commercial RTU filter changing in Bartlett, Tennessee. Technicians replaced rooftop unit filters to maintain HVAC efficiency and indoor air quality for the facility.

Solace Heating and Air replaced eight 16x20x1 filters and four 20x20x1 filters in Bartlett, Tennessee. Technicians inspected blower wheels on two units and recommended future cleaning. All three HVAC units are currently operating and heating normally.

Solace Heating and Air inspected a heating system in Memphis, Tennessee. The technician tested electrical components, examined air filters and coils, and confirmed safe carbon monoxide levels. They recommended cleaning the flame sensor and provided estimates for indoor air quality upgrades. The system is currently operating and heating normally.

Solace Heating and Air inspected two HVAC systems in Bartlett, Tennessee. Technicians tested electrical components, airflow, and carbon monoxide levels. They confirmed proper operation and heating performance. Blower wheels and filters were clean. The team recommended indoor air quality products and surge protectors for added system support.

Solace Heating and Air replaced a warranty ECM blower motor in a package HVAC unit in Covington, Tennessee. This service restored proper airflow and system performance for the customer’s heating and cooling equipment.

Solace Heating and Air performed heating system maintenance in Memphis, Tennessee. The technician inspected the furnace heat exchanger, tested safety switches and igniters, checked the air filter, measured blower motor amperage, and confirmed system operation. All smoke and carbon monoxide detectors in the home were also tested to verify proper function.

Solace Heating and Air completed a full HVAC system inspection in Olive Branch, Mississippi. Technicians checked all electrical connections, airflow levels, filter condition, and carbon monoxide readings. They confirmed safe and efficient operation with no fault codes present. The system met manufacturer standards and is heating properly. Indoor air quality options were also recommended.

Solace Heating and Air inspected two HVAC systems in Olive Branch, Mississippi. Technicians tested electrical components, filters, blower wheels, and coils. All parts met factory standards. They confirmed both systems operated correctly and provided normal heating performance.

Solace Heating and Air inspected a heating unit in Memphis, Tennessee. They tested electrical parts and verified correct operation. They checked the filter, blower wheel, and carbon monoxide levels. All systems were clean and safe. The technician also recommended air quality options and plans to locate floor return grilles to reduce noise.

Solace Heating and Air inspected two HVAC systems in Olive Branch, Mississippi. A technician tested electrical components, recommended replacing two blower capacitors, and advised cleaning the downstairs blower wheel. Both systems operated normally. The technician also checked filters and sent an estimate to install pan overflow switches for added protection.

Solace Heating and Air installed a germicidal UVC light in Bartlett, Tennessee. They connected it to the EAC terminal so it activates only when the blower runs. Both the HVAC unit and UVC system now operate normally.

Solace Heating and Air inspected two HVAC systems in Bartlett, Tennessee. Technicians tested electrical components, blower wheels, and filters, confirming all are functioning correctly. Both systems operate as expected. The team advised installing one safety switch per unit, as neither system currently includes this essential safety feature.

Solace Heating and Air inspected two HVAC systems in Germantown, Tennessee. The team tested electrical components, blower wheels, and filters. Both systems operated normally. The technician advised adding safety switches to prevent potential ceiling damage from condensation leaks. Filter replacement will be needed soon.

Solace Heating and Air inspected two HVAC systems in Collierville, Tennessee. Technicians tested electrical components, replaced a faulty blower capacitor, and confirmed proper heating operation. They checked filters and blower wheels, which were in good condition. A safety switch installation was recommended for the downstairs system to improve system protection.

Solace Heating and Air inspected a heating system in Southaven, Mississippi. The technician tested electrical components, blower wheel, and filter. All parts met manufacturer standards and the system operated normally. The technician also suggested three indoor air quality products to support system performance and home air health.

A technician in Olive Branch, Mississippi repaired a furnace that displayed a fault code linked to grounding or igniter issues. The igniter tested within normal specifications. Further inspection revealed a disconnected ground wire, which the technician fixed to restore proper heating function.

Solace Heating and Air inspected a heating system in Holly Springs, Mississippi. The technician tested electrical components, checked the filter, blower wheel, and a-coil, and confirmed proper system function. A-coil cleaning was recommended. The technician also suggested indoor air quality upgrades to improve system performance.

Solace Heating and Air conducted HVAC service in Raleigh, NC, which included temperature and airflow testing at ceiling vents using specialized meters. The technician also inspected and tested components inside the furnace, and replaced the air filters with new Filtrete 16x20x1 filters to maintain system efficiency.

Solace Heating and Air inspected heating systems in Germantown, Tennessee, on December 9, 2025. Technicians tested electrical connections, filters, and blowers; all met manufacturer specifications, ensuring efficient, reliable heating for homeowners this winter.

Solace Heating and Air inspected three HVAC systems in Somerville, Tennessee. Technicians tested electrical components, filters, blower wheels, and A-coils. All systems operated normally. One unit in a second house needs coil cleaning for improved efficiency. The remaining systems meet manufacturer specifications and are heating properly.

Solace Heating and Air repaired a separated main hard pipe trunk line in Germantown, Tennessee. The technician secured the joint with screws and HVAC tape, restoring proper airflow to the room. Estimates were also provided for JB Warranties to support future coverage needs.

Solace Heating and Air inspected two HVAC units in Germantown, Tennessee, during a no-heat call. Both units were tested and found to be operating correctly. The technician cycled the systems and confirmed normal heating. Estimates were also provided for blower wheel cleaning and installation of Solace Air products.

Solace Heating and Air completed a dual system inspection in Memphis, Tennessee. Technicians tested electrical connections and components, confirmed both blower wheels operated correctly, replaced 20x25x5 filters, and verified that both heating units functioned within manufacturer specifications.

A technician in Collierville, Tennessee inspected a heating system and found rust buildup and cracks in the heat exchanger. The damage caused unsafe flame rollout. For safety, the gas supply was turned off, and a comfort advisor was scheduled to provide a system replacement estimate.

Solace Heating and Air inspected three furnace systems in Oakland, Tennessee. Technicians tested electrical components, blower wheels, and filters, confirming all operated within manufacturer specifications. Each furnace was checked for standard heating function and found to be working properly. Recommendations were made for air quality products to support ongoing system performance.

Solace Heating and Air inspected a heating system in Memphis, Tennessee. The technician found a dirty filter causing the unit to overheat and shut down. After cleaning, the system resumed normal heating operation. Regular filter maintenance helps prevent similar issues and supports consistent system performance.

Solace Heating and Air performed a heating system inspection in Bartlett, Tennessee. The technician tested electrical components, inspected the filter and blower wheel, and confirmed electric heat and heat pump operation. A customer-supplied 16x20x1 filter was installed. The system is heating normally and all components meet manufacturer specifications.

Solace Heating and Air inspected two HVAC systems in Germantown, Tennessee. The technician confirmed both systems were functioning normally. They checked all electrical connections, control boards, and thermostats with no errors found. Potential issues with existing Nest thermostats were noted, and estimates for replacements were provided in case the problem continues.

A technician in Germantown, Tennessee, re-attached broken ductwork to restore proper airflow. The heating system now functions correctly and maintains normal performance.

A technician diagnosed a reverse airflow sensor error in a heating system in Memphis, Tennessee. After inspecting wiring and airflow with no issues found, the technician reset the thermostat. The system was cycled three times and confirmed operational. An estimate for new thermostats was provided in case the problem returns.

A technician replaced an Ecobee thermostat with a standard model in Memphis, Tennessee. The service included verifying proper function of the heat strips and heat pump. The system is now operating and cooling as expected.

Solace Heating and Air inspected a heating system in Memphis, Tennessee. Technicians tested all electrical components, checked filters and the blower wheel, and confirmed the system operates and heats normally. Filters showed minor dirt but did not require replacement. All parts met manufacturer specifications during the check.

A technician in Moscow, Tennessee diagnosed a heat pump issue caused by a tripped breaker. They inspected the heat strips and electrical connections, discovered a loose ground wire, and secured it. The technician tested the system to confirm stable operation. The heat pump is now running and heating normally.

In Memphis, TN, Solace Heating and Air replaced a faulty blower capacitor in a heating system on November 26, 2025, restoring normal heating performance and ensuring reliable winter comfort for homeowners.

Solace Heating and Air inspected an HVAC system in Memphis, Tennessee, on November 26, 2025. The technician tested all electrical components within manufacturer specs, replaced a customer-supplied 20x20x1 filter, confirmed coil and blower cleanliness, and verified proper function in electric heat and heat pump modes. The unit is heating normally.

Solace Heating and Air inspected three HVAC systems in Oakland, Tennessee. Technicians tested electrical connections, blower wheels, and filters. One blower wheel required cleaning, and an estimate was provided. All systems operated properly and produced heat within manufacturer specifications.

Solace Heating and Air inspected two HVAC systems in Southaven, Mississippi, on November 19, 2025. Technicians tested all electrical components, verified blower wheels, replaced three 16x25x1 air filters, and confirmed both units operated within manufacturer heating specifications, ensuring reliable winter performance.

Solace Heating and Air inspected electrical connections, filters, and blower wheels for two HVAC systems in Olive Branch, Mississippi. All parts tested within manufacturer specifications. Both systems operated and heated properly during the check.

Solace Heating and Air inspected two heating systems in Memphis, Tennessee. Technicians tested electrical components and replaced the downstairs filter. They confirmed that both systems ran properly, though the downstairs inducer motor showed slightly elevated readings due to system age.

Solace Heating and Air inspected three HVAC systems in Germantown, Tennessee. Technicians checked all electrical connections and components, replaced one faulty capacitor, and confirmed the others met manufacturer standards. They also examined air filters, blower wheels, and overall system performance. All units are operating normally and providing proper heating.

Solace Heating and Air inspected two HVAC systems in Memphis, Tennessee. Technicians tested all electrical connections, replaced air filters, and examined blower wheels. Both systems operated correctly and met manufacturer specifications. Heating functions were confirmed to be working as expected.

A technician in Memphis, Tennessee inspected electrical connections and components on a heating unit, confirming all were within manufacturer specifications. The technician cleaned the blower wheel, replaced a 20x20x1 air filter provided by the customer, and confirmed the system was operating and heating correctly.

Solace Heating and Air completed a heating system inspection in Bartlett, Tennessee. Technicians tested electrical connections and components, confirmed the blower wheel and filter were in good condition, and verified the system operated and heated normally.

Solace Heating and Air inspected three HVAC systems in Germantown, Tennessee. Technicians tested all electrical connections and components, confirmed blower wheel performance, replaced air filters, and verified normal heating operation. All systems met manufacturer specifications during the service check.

On November 10, 2025, Solace Heating and Air serviced two HVAC systems in Collierville, Tennessee, testing electrical components and blower wheels. They replaced three 20x25x1 air filters, confirming both systems heat efficiently per manufacturer standards.

Solace Heating and Air inspected an HVAC system in Memphis, Tennessee, testing electrical connections, blower wheel, and filters; all met manufacturer specs. The system operated efficiently, ensuring reliable heating during the November service visit.

Solace Heating and Air completed a heating system inspection in Bartlett, Tennessee. Technicians tested electrical connections, blower wheel, and filters. All components operated within manufacturer specifications. The unit was confirmed to be heating and running properly.

Solace Heating and Air inspected electrical connections and components, confirming all met manufacturer specifications. Technicians replaced customer-supplied Aprilaire 413 filters and verified both systems operated and heated properly. This HVAC maintenance service was completed in Germantown, Tennessee.

Solace Heating and Air inspected three heating systems in Bartlett, Tennessee. Technicians checked all electrical components, tested blower wheels, and replaced four 16x25x1 air filters. Each unit was evaluated for proper heating and confirmed to operate within manufacturer specifications.

A technician in Millington, Tennessee repaired damage to both HVAC systems caused by chewed pressure switch hoses. They replaced the damaged sections and inspected all electrical components. After the service, both heating units operated correctly.

A technician in Collierville, Tennessee replaced a faulty high limit switch in a furnace heat exchanger compartment. The switch was shutting off before reaching the correct temperature. After replacement, the furnace resumed normal heating performance.

Solace Heating and Air restored a heating unit in Germantown, Tennessee. The technician replaced a faulty 7.5mfd blower capacitor and verified system function by cycling the unit three times. The gas valve appeared stuck from summer inactivity, and an estimate was provided for replacement. The unit is now operating and heating properly.

A technician in Senatobia, Mississippi checked all electrical connections and components of a heating unit. The blower wheel and a-coil were inspected, and the customer-supplied air filter was replaced. The technician confirmed the system is operating and heating normally.

Solace Heating and Air inspected two HVAC systems in Germantown, Tennessee. Technicians tested all electrical components, verified filter, blower, and coil cleanliness, and confirmed both units operated and heated correctly. All components met manufacturer specifications.

Solace Heating and Air inspected an HVAC system in Collierville, Tennessee. Technicians confirmed electrical components met manufacturer specifications, and verified the blower wheel, filter, and a-coil were clean. They tested overall system performance and confirmed the unit was heating and operating normally.

Solace Heating and Air inspected a home heating system in Germantown, Tennessee. Technicians tested electrical components, cleaned filters and coils, and restored normal heat by clearing an obstruction from the pressure switch. The system was confirmed to be heating and operating properly.

A technician in Bartlett, Tennessee replaced a faulty thermostat that was disrupting the blower motor during heat mode. After installation and blower setting adjustments, the heating system resumed normal operation.

Solace Heating and Air inspected two HVAC systems in Bartlett, Tennessee. The technician tested electrical components, assessed the blower wheels, a-coils, and filters, and confirmed both systems are operating normally. An issue was noted with the upstairs gas valve, which opened during service but may need replacement if problems persist.

Solace Heating and Air inspected three HVAC systems in Germantown, Tennessee, on October 24, 2025. Technicians tested electrical connections, compressors, blower wheels, filters, and coils, all meeting manufacturer specifications. One Aprilaire 413 filter requires replacement. Each system operated normally, ensuring reliable heating performance this season.

Solace Heating and Air inspected an HVAC system in Memphis, Tennessee. They tested all electrical components, confirmed the blower wheel, filter, and A-coil were clean, and verified the system was heating correctly. The unit operated within manufacturer specifications and showed no issues during the service.

A technician in Memphis, Tennessee inspected a furnace and found the gas valve in the off position. After verifying all gas connections, the technician turned the gas back on. The furnace resumed normal operation and began heating properly.

Solace Heating and Air inspected four HVAC systems in Collierville, Tennessee. The team tested electrical connections, filters, blower wheels, and a-coils. All components met manufacturer specifications. Each system operated correctly and provided heat as expected.

Solace Heating and Air inspected electrical connections, filters, blower wheels, and A-coils for two heating systems in Germantown, Tennessee. Both units operated normally. Only the Aprilaire filters showed signs of wear and may need replacement soon. All other components met manufacturer specifications and showed no signs of damage or dirt buildup.

A technician in Memphis, Tennessee inspected an HVAC system, tested all electrical components, and found the blower capacitor out of specification. They recommended replacement, but the homeowner chose to delay. The technician also checked the blower wheel, filter, and A-coil, confirming they were clean. The system is currently operating and heating correctly.

Solace Heating and Air inspected two HVAC systems in Collierville, Tennessee. Technicians tested all electrical connections, confirmed both blower wheels and a-coils were clean, and verified filters were clear. Both systems operated within manufacturer specifications and were cooling as expected.