Memphis, TN
Select Your Location
Jackson Jackson, TN. 38305 Set as my Location
Memphis Memphis, TN. 38134 Set as my Location
Nashville Nashville, TN. 37072 Set as my Location

Heat Pump Maintenance Near Memphis, TN

Heat Pump Tune-Up & No-Breakdown Guarantee

Schedule With Solace Plumbing, Heating, and Air Today!

Our Promise to You is to Perform the Correct Heat Pump Maintenance at an Honest Price

When you’re in need of Heating services, trust in the expertise of Solace Plumbing, Heating, and Air. Our experienced technicians arrive fully equipped with the necessary knowledge and tools to promptly tackle a variety of Heat Pump issues.

Upon reaching your location, our skilled Solace Plumbing, Heating, and Air technician will engage in a comprehensive discussion about your available options, ensuring you’re well-informed before any repair or installation work begins. With our extensive experience in servicing and repairing a diverse range of brands, you can rely on us for top-notch and dependable repairs.

Your satisfaction is paramount to us, and we are dedicated to ensuring it every step of the way.

Solace Plumbing, Heating, and Air is Here for All of Your Heating Needs!

Get a System Quote.

Answer a few quick questions, get an instant on-screen quote, and schedule a home visit.

Solace Plumbing, Heating, and Air Offers Top-Quality Heating Services Near Memphis, TN

Call Today for Your Heat Pump Maintenance Service!
A technician wearing gloves meticulously works on an outdoor air conditioning unit, expertly performing heat pump maintenance in Nashville, TN.

Get the Quality, Reliable Service You Deserve

Solace Plumbing, Heating, and Air | Memphis, TNs Trusted Heating Professionals

Count on us for all your home Heating needs, whether it’s installation, maintenance, or repair. No matter the challenge or time of year, rely on the dependable expertise of Solace Plumbing, Heating, and Air for exceptional service and superior craftsmanship.

Solace Plumbing, Heating, and Air is proudly & professionally serving the greater Memphis, TN area.

Why Annual Proper Maintenance is Necessary For Your Heat Pump

There are few more discouraging issues to have with a home than with its heating and cooling system. One way to avoid, or at least lessen the chances of those discouraging moments, is to have annual proper maintenance performed on your home’s heat pump. In addition, here are a few more reasons why proper maintenance is necessary for your heat pump:

At Solace Plumbing, Heating, and Air, our dedicated team specializes in delivering expert Heating services. Contact us today or easily schedule service via our contact form. Trust our Memphis, TN specialists to offer seamless solutions, upfront pricing, and assured customer satisfaction, no matter your requirements.

Have a question about your Heat Pump? Ask an expert from Solace Plumbing, Heating, and Air below for fast answers & get reliable service that your neighbors trust!

Schedule a Comprehensive Home Heat Pump Maintenance Near You in Memphis, TN

Dealing with Heating issues at home? Choose Solace Plumbing, Heating, and Air as your trusted repair service provider in Memphis, TN. Book your service today and let’s get your repair started!

Solace Plumbing, Heating, and Air is Proud to Offer Affordable Financing Options With Approved Credit. 

Contact Us Today to Start Saving!

Enhance your home seamlessly with our flexible financing options. Whether it’s repairs or installations, we’ve got the perfect solutions for you. Reach out to Solace Plumbing, Heating, and Air today to discover the ideal plan for your home in Memphis, TN!

Customer Reviews

A map detailing the service area across Memphis, showcasing marked locations, streets, highways, parks, and nearby towns.

PROUDLY SERVING MEMPHIS, TN

  • Germantown
  • Collierville
  • Bartlett
  • Memphis
  • East Memphis
  • Lakeland
  • Arlington
  • Millington
  • Cordova
  • Eads
  • Piperton
  • Rossville
  • Oakland
  • Southaven

Frequently Asked Questions About Heat Pump Maintenance

Most Recent Pins (48)

Alex Martin
Solace Heating and Air performed comprehensive cooling maintenance in West Memphis, AR. They cleaned the condenser, tested electrical components, inspected refrigerant levels, flushed the drain line, and replaced the air filter. They also checked thermostat function and system operation to ensure efficient and safe cooling.
Check-in Location
Air filter clogged with dust and debris buildup
Air filter clogged with dust and debris buildup20x25x1 Air Filter Replacement with Polarized MediaAir handler unit with refrigerant line insulation installation
Alex Martin
Solace Heating and Air in Marion, AR performs cooling maintenance by cleaning condenser units, checking electrical components, inspecting refrigerant levels, and ensuring proper airflow. They measure system performance and verify thermostat function to maintain efficient and safe air conditioning operation.
Check-in Location
Condenser unit cleaning and inspection on outdoor HVAC system
Condenser unit cleaning and inspection on outdoor HVAC systemAir handler unit with service and installation information
Alex Martin
Solace Heating and Air in Memphis, TN performed cooling maintenance by cleaning the condenser, checking capacitors, refrigerant charge, and electrical components. They inspected airflow, temperature split, thermostat function, and system operation to ensure efficient and safe performance while preventing future issues.
Check-in Location
Condenser units outdoors during cooling system maintenance
Condenser units outdoors during cooling system maintenanceEvaporator coil with heavy dust and debris buildup
Alex Martin
Solace Heating and Air performed cooling maintenance in Olive Branch, MS. Technicians cleaned the condenser, checked capacitors, inspected refrigerant levels, measured amp draw, and verified thermostat operation. They flushed the condensate drain, examined coils and fans, tested electrical components, and evaluated overall system efficiency.
Check-in Location
Condenser unit on rooftop during HVAC maintenance
Condenser unit on rooftop during HVAC maintenanceHVAC air filters removed for cleaning or replacement
Alex Martin
Solace Heating and Air provided cooling system maintenance in Memphis, TN. They cleaned the condenser unit, checked capacitors, refrigerant charge, and electrical components. They inspected airflow, flushed the condensate drain, verified thermostat function, and measured system performance to ensure efficient and safe operation.
Check-in Location
Condenser units lined up outdoors during HVAC maintenance
Condenser units lined up outdoors during HVAC maintenanceAir handler unit with insulated ductwork in attic
Alex Martin
Solace Heating and Air performed cooling maintenance in Memphis, Tennessee. The service included cleaning the condenser unit, inspecting electrical components, checking refrigerant levels, flushing the drain line, and verifying thermostat function to ensure efficient and safe system operation while preventing future breakdowns.
Check-in Location
Furnace control panel with wiring inspection
Alex Martin
A technician replaced a polarized media air cleaning filter in Memphis, Tennessee. This service improves indoor air quality by ensuring the air filtration system functions correctly. Regular filter changes support cleaner air and maintain HVAC system efficiency.
Check-in Location
Polarized media air cleaning filter swap in HVAC system
Alex Martin
Solace Heating and Air completed a full heating system maintenance check in Memphis, Tennessee. The team inspected the furnace heat exchanger, tested safety switches, verified igniter functions, checked filter condition, measured blower motor amp draw, and confirmed proper operation of electric heat strips and smoke detectors. All systems met manufacturer specifications.
Check-in Location
Furnace heat exchanger inspection and amp testing
Alex Martin
Solace Heating and Air completed a furnace maintenance service in Memphis, Tennessee. Technicians inspected the heat exchanger, tested safety switches, checked igniters, measured blower motor current, replaced air filters, confirmed 15-minute operation without faults, and tested smoke and carbon monoxide detectors. This service helps ensure reliable furnace performance and household safety.
Check-in Location
Furnace heat exchanger and control board inspection
Alex Martin
Solace Heating and Air completed heat maintenance in Memphis, Tennessee. Technicians inspected the system, cleaned components, and tested performance. This service helps heating systems run efficiently and prevents unexpected breakdowns.
Check-in Location
American Standard HVAC furnace units with wiring setup
Alex Martin
Solace Heating and Air completed a furnace safety inspection in Memphis, Tennessee. The technician checked the heat exchanger, air filter, flame sensors, and igniters. They tested safety switches, measured blower motor amps, verified system runtime, and inspected all smoke and carbon monoxide detectors.
Check-in Location
Furnace heat exchanger inspection and safety testing
Alex Martin
Solace Heating and Air completed a heating system maintenance service in Bartlett, Tennessee. Technicians inspected the furnace heat exchanger, air filter, safety switches, and ignition components. They tested blower motor performance, confirmed proper system operation, and checked all smoke and carbon monoxide detectors for function and safety.
Check-in Location
Furnace heat exchanger inspection and safety check
Alex Martin
Solace Heating and Air completed heating system maintenance in Bartlett, Tennessee. Technicians inspected the furnace heat exchanger, tested safety switches and igniters, checked air filter condition, measured blower motor amp draw, and confirmed proper system operation. All home smoke and carbon monoxide detectors were tested for functionality.
Check-in Location
Furnace heat exchanger inspection and safety check
Furnace heat exchanger inspection and safety checkFurnace heat exchanger inspection with safety checks
Alex Martin
Solace Heating and Air completed routine furnace maintenance in Arlington, Tennessee. The technician inspected the heat exchanger, tested safety switches, cleaned the flame sensor, checked the air filter, measured blower motor amp draw, and verified proper system operation. All smoke and carbon monoxide detectors were also tested for functionality.
Check-in Location
Furnace heat exchanger and safety inspection in attic
Furnace heat exchanger and safety inspection in atticFurnace heat exchanger inspection and safety check
Alex Martin
Solace Heating and Air cleaned the blower wheel assembly and evaporator coil in Bartlett, Tennessee. This service improves airflow and supports reliable system operation by removing dirt buildup that can reduce HVAC performance.
Check-in Location
Evaporator coil fins close-up showing dust buildup
Evaporator coil fins close-up showing dust buildupBlower wheel assembly with cleaning foam appliedEvaporator coil with heavy dirt buildup
Alex Martin
Solace Heating and Air completed a blower wheel assembly and cleaned the evaporator coil in Bartlett, Tennessee. This service helps maintain airflow and improves system efficiency. Regular cleaning of internal components supports better operation and reduces strain on HVAC systems.
Check-in Location
Evaporator coil inside HVAC unit with wiring and pipes
Alex Martin
Solace Heating and Air adjusted and balanced airflow for a residential HVAC system in Memphis, Tennessee. The service helped optimize indoor air distribution for improved comfort and ventilation across all rooms.
Check-in Location
Furnace airflow adjustment and balancing in utility closet
Alex Martin
Solace Heating and Air adjusted and balanced airflow throughout a residential home in Memphis, Tennessee. The team ensured consistent air distribution across all rooms to improve comfort and system efficiency.
Check-in Location
Furnace airflow balancing and adjustment in home
Alex Martin
Solace Heating and Air completed a no-heat service call for a downstairs HVAC system in Memphis, TN, diagnosing and repairing the heating issue to restore comfort during winter months.
Check-in Location
Furnace draft inducer motor and wiring connections
Furnace draft inducer motor and wiring connectionsGas furnace with vent pipe in basement utility area
Alex Martin
Solace Heating and Air completed furnace maintenance in Germantown, Tennessee. The technician inspected the heat exchanger, tested safety switches, examined igniters, measured blower motor amp draw, and confirmed system operation. The team also checked air filters and tested smoke and carbon monoxide detectors to verify safety and performance.
Check-in Location
Furnace burners with active blue flames and wiring
Furnace burners with active blue flames and wiringFurnace heat exchanger and safety switch inspectionConcrete crawl space floor inspection with flashlight illuminationFurnace heat exchanger interior during inspection in Memphis
Alex Martin
Solace Heating and Air inspected a heat mode failure in a package unit in Covington, Tennessee. The technician tested system cycling, flame sensor, blower amp draw, evaporator coil cleanliness, capacitor readings, limit switches, air filters, and temperature differential. After 35 minutes of monitoring, the system was confirmed to operate normally.
Check-in Location
Package unit heat pump outside home with service tags
Alex Martin
Solace Heating and Air adjusted the thermostat temperature on a communicating rooftop gas package unit in Germantown, Tennessee. This service ensures accurate climate control and optimal system performance for the building.
Check-in Location
Communicating rooftop gas package unit control board
Alex Martin
Solace Heating and Air completed a heating system maintenance service in Bartlett, Tennessee. The technician inspected the furnace heat exchanger, tested safety switches, checked the air filter, verified igniter function, measured motor amp draw, and confirmed a 15-minute system run. All household smoke and carbon monoxide detectors were tested for proper operation.
Check-in Location
Furnace heat exchanger inspection with amp draw meter
Furnace heat exchanger inspection with amp draw meterFurnace air filter with electrical testing meterFurnace heat exchanger carbon monoxide safety check debris
Alex Martin
Solace Heating and Air cleaned the blower wheel and assembly on a rooftop package unit in Bartlett, Tennessee. This service supports consistent airflow and system efficiency by removing dust and debris from essential ventilation components.
Check-in Location
Blower wheel in rooftop package HVAC unit with dirt buildup
Blower wheel in rooftop package HVAC unit with dirt buildupBlower wheel and assembly on rooftop HVAC unitBlower wheel assembly on rooftop HVAC unit with dirt buildupBlower wheel assembly on rooftop HVAC unit with dust buildup
Alex Martin
Solace Heating and Air serviced an HVAC unit in Mount Airy, NC. The work included inspecting and likely cleaning the unit's coil and blower wheel to ensure proper airflow and system efficiency. The photos show the coil with some dust accumulation and the blower wheel without its fan blades, indicating maintenance activity.
Check-in Location
HVAC coil with dust buildup during maintenance
HVAC coil with dust buildup during maintenanceBlower wheel with dust buildup, no fan blades visible
Alex Martin
Solace Heating and Air cleaned the blower wheel on a commercial rooftop HVAC unit in Bartlett, Tennessee, improving airflow consistency and boosting energy efficiency for reliable building climate control.
Check-in Location
Blower wheel inside commercial rooftop unit, dirty condition
Blower wheel inside commercial rooftop unit, dirty conditionBlower wheel with foam cleaner in commercial RTU unitBlower wheel inside commercial rooftop unit HVAC system
Oscar Gruber
Solace Heating and Air inspected an HVAC system in Memphis, Tennessee. Technicians tested all electrical connections, cleaned the filter, blower wheel, A-coil, and condenser coil, and confirmed normal heating function. They also recommended indoor air quality products and provided related estimates to the customer.
Check-in Location
Blower wheel and motor inside HVAC unit clean and checked
Blower wheel and motor inside HVAC unit clean and checkedA-coil and insulated refrigerant lines in HVAC systemCeiling air vent temperature reading with infrared toolElectrical connections on HVAC condenser unit testedElectrical connections multimeter reading on HVAC system wiring
Alex Martin
Solace Heating and Air completed a quarterly filter change on all rooftop package units as part of a commercial HVAC maintenance service in Bartlett, Tennessee. This service helps maintain consistent airflow and system performance across the property.
Check-in Location
Roof top package unit filter replacement on commercial units
Alex Martin
Solace Heating and Air provided heating maintenance in Somerville, Tennessee. Technicians inspected the furnace heat exchanger, tested safety switches, checked the blower motor, and verified system performance. They also replaced air filters and the condenser contactor, and tested smoke and carbon monoxide detectors to ensure safe and reliable operation.
Check-in Location
Condenser unit with hose and sprayer during maintenance
Condenser unit with hose and sprayer during maintenanceFurnace heat exchanger and outdoor condenser unit maintenanceCondenser contactor and wiring in furnace unitFurnace heat exchanger inspection and filter replacement
Alex Martin
Solace Heating and Air corrected a list of failed mechanical code inspection items in Memphis, Tennessee. The service ensured compliance with local mechanical standards by addressing specific issues identified during inspection.
Check-in Location
Electrical outlet with power cord extension in attic
Alex Martin
Solace Heating and Air performed quarterly commercial RTU filter changing in Bartlett, Tennessee. Technicians replaced rooftop unit filters to maintain HVAC efficiency and indoor air quality for the facility.
Check-in Location
Commercial rooftop unit air conditioner on roof
Commercial rooftop unit air conditioner on roofCommercial rooftop unit evaporator coil with bent finsRTU coil with accumulated dirt and debris buildupCommercial RTU air filters labeled 01/12/26 installedCommercial RTU air filters installed inside unit
Alex Martin
Solace Heating and Air replaced a warranty ECM blower motor in a package HVAC unit in Covington, Tennessee. This service restored proper airflow and system performance for the customer’s heating and cooling equipment.
Check-in Location
ECM blower motor with wiring in HVAC unit
ECM blower motor with wiring in HVAC unitPackage unit with open access panel and wiring visible
Alex Martin
Solace Heating and Air performed heating system maintenance in Memphis, Tennessee. The technician inspected the furnace heat exchanger, tested safety switches and igniters, checked the air filter, measured blower motor amperage, and confirmed system operation. All smoke and carbon monoxide detectors in the home were also tested to verify proper function.
Check-in Location
Furnace burner tubes inspection and maintenance
Furnace burner tubes inspection and maintenanceFurnace heat exchanger and blower motor inspection unitMitsubishi ductless mini-split air conditioner unit mounted
Oscar Gruber
Solace Heating and Air inspected two HVAC systems in Olive Branch, Mississippi. Technicians tested electrical components, filters, blower wheels, and coils. All parts met factory standards. They confirmed both systems operated correctly and provided normal heating performance.
Check-in Location
Ceiling air vent temperature measurement with infrared gun
Ceiling air vent temperature measurement with infrared gunHVAC vent temperature measurement with infrared gunA-coils inside HVAC system, clean and intactCapacitor testing with clamp meter on ground leavesFurnace electrical and filter inspection in utility closet
Oscar Gruber
Solace Heating and Air performed a heating system inspection in Bartlett, Tennessee. The technician tested electrical components, inspected the filter and blower wheel, and confirmed electric heat and heat pump operation. A customer-supplied 16x20x1 filter was installed. The system is heating normally and all components meet manufacturer specifications.
Check-in Location
16x20x1 HVAC air filters stacked on tile floor
16x20x1 HVAC air filters stacked on tile floorAir vent temperature check with infrared thermometerBlower wheel inside HVAC unit showing clean metal finsA-coil and blower wheel inside HVAC unitA-coil inside HVAC system with some dust buildup
Oscar Gruber
A technician replaced an Ecobee thermostat with a standard model in Memphis, Tennessee. The service included verifying proper function of the heat strips and heat pump. The system is now operating and cooling as expected.
Check-in Location
Standard thermostat installed on beige wall
Standard thermostat installed on beige wallStandard wall thermostat installed with temperature displayHVAC vent temperature check with infrared thermometerCopper pipe temperature check with infrared thermometerTrane heat pump unit in closet with service tags
Oscar Gruber
Solace Heating and Air inspected an HVAC system in Memphis, Tennessee, on November 26, 2025. The technician tested all electrical components within manufacturer specs, replaced a customer-supplied 20x20x1 filter, confirmed coil and blower cleanliness, and verified proper function in electric heat and heat pump modes. The unit is heating normally.
Check-in Location
HVAC control board testing with multimeter readings
HVAC control board testing with multimeter readingsClamp meter measuring electrical connections inside HVAC unitBlower wheel inside HVAC unit cleaned and inspectedCeiling air vent temperature check with infrared thermometerHVAC air filters before and after replacement
Oscar Gruber
Solace Heating and Air completed a heating system inspection in Memphis, Tennessee. The technician tested electrical components, cleaned the condenser coil, blower wheel, and filter, and confirmed the system operated and heated as expected. All components met manufacturer specifications and showed no signs of malfunction.
Check-in Location
Condenser coil and blower wheel in outdoor AC unit
Condenser coil and blower wheel in outdoor AC unitClamp meter on HVAC electrical connection checking currentElectrical component testing with clamp meter on HVAC systemFurnace burner assembly with electrical wiring and gas flamesFurnace system with electrical components and vent pipe
Drew Layton
Check-in Location
Oscar Gruber
Solace Heating and Air inspected an HVAC unit in Memphis, Tennessee. The technician tested all electrical components, verified they met manufacturer specifications, and confirmed the filter, blower wheel, and a-coil were clean. The system operated correctly and provided normal heating performance.
Check-in Location
HVAC vent temperature check with infrared thermometer
HVAC vent temperature check with infrared thermometerAir conditioner unit exterior with fan and grilleBlower wheel and filter inspection in HVAC unitA-coil and refrigerant lines in HVAC unitFurnace unit with electrical and cleanliness check
Oscar Gruber
Solace Heating and Air inspected two HVAC systems in Collierville, Tennessee. Technicians tested electrical components, blower wheels, a-coils, and filters. All parts matched manufacturer specifications. Both systems operated normally and provided heat as expected.
Check-in Location
HVAC vent temperature check with infrared thermometer
HVAC vent temperature check with infrared thermometerGas furnace burner flames glowing inside the unitMini split outdoor unit with clean air filter panelA-coil inside HVAC unit during inspectionGas furnace burner flames and electrical wiring inspection
Drew Layton
A technician in Atoka, Tennessee repaired a damaged copper line set on an outdoor AC unit after improper welding caused significant leaks. The system was restored to factory specifications and is now working properly.
Check-in Location
Josh Buckley
Solace Heating and Air completed HVAC maintenance in Southaven, Mississippi. Technicians inspected electrical connections and component amperage, cleaned the condensing coils, and checked the refrigerant cycle. The system showed proper performance with a 20-degree temperature drop across the coil and is operating within specifications.
Check-in Location
Trane air conditioning unit with dirty condensing coils
Trane air conditioning unit with dirty condensing coilsCondenser coil and electrical inspection on AC unitTrane HVAC unit with cleaned condensing coils and filterHVAC air filter panel leaning against brick wall outdoors
Drew Layton
Solace Heating and Air repaired a broken air conditioning system and replaced a failed water heater in Memphis, Tennessee. The service restored cooling and hot water, ensuring proper home comfort functionality.
Check-in Location
Drew Layton
Check-in Location
Drew Layton
Check-in Location
Drew Layton
Check-in Location
Drew Layton
Solace Heating and Air completed an HVAC inspection in Bartlett, Tennessee. The technician checked system components for proper operation and identified any signs of wear or malfunction. This service helps maintain efficiency and prevent future breakdowns. Regular inspections support long-term performance and reduce repair needs.
Check-in Location
Check-ins - Reviews - Content - Ranking

It Was a Pleasure Serving You!



×