Memphis, TN
Select Your Location
Jackson Jackson, TN. 38305 Set as my Location
Memphis Memphis, TN. 38134 Set as my Location
Nashville Nashville, TN. 37072 Set as my Location

Most Recent Pins (1055)

Oscar Gruber
Solace Heating and Air serviced an older R22 HVAC unit in Olive Branch, MS. They inspected electrical connections, replaced both fan and compressor capacitors with a dual run capacitor, and checked filters, blower wheels, and coils. The system was tested and confirmed to be running and cooling properly.
Check-in Location
HVAC capacitor testing with digital multimeter on unit fan
HVAC capacitor testing with digital multimeter on unit fanHVAC dual run capacitor replacements on service truckDual run capacitor with connected wiring in HVAC unitCeiling vent temperature check with infrared thermometerAir conditioner filter replacement during HVAC maintenance
Oscar Gruber
Solace Heating and Air in Memphis, TN, replaced a faulty dual run capacitor causing the fan to stop. After repair, the unit’s fan runs within manufacturer specs, restoring cooling. A surge protector was also installed for system protection.
Check-in Location
Dual run capacitor and clamp meter on AC fan coil unit
Dual run capacitor and clamp meter on AC fan coil unitDual run motor capacitor with wiring inside HVAC unitHVAC floor vent temperature check with laser thermometerSurge protector installed on outdoor metal junction boxDual run capacitor testing with clamp meter
Alex Martin
Solace Heating and Air provided cooling maintenance in Millington, TN. The service included cleaning the condenser unit, inspecting capacitors, refrigerant levels, and electrical components. They checked airflow, flushed the condensate drain, tested system temperatures, and ensured proper thermostat operation and overall system safety.
Check-in Location
Air conditioner condenser unit on concrete pad outdoors
Air conditioner condenser unit on concrete pad outdoorsFurnace unit in utility closet with pipe connections
Alex Martin
Solace Heating and Air inspected heating systems in Arlington, TN, verifying charge, capacitor levels, filter cleanliness, and temperature differences. They confirmed both systems function well but noted that the filters need replacement to maintain optimal performance.
Check-in Location
Heat mode HVAC systems with clean filters, capacitor checked
Heat mode HVAC systems with clean filters, capacitor checkedFurnace unit in attic with ductwork and insulation
Alex Martin
Solace Heating and Air in Memphis, TN replaced a capacitor that was out of manufacture specifications. They completed the repair under warranty, waiving fees for parts and labor. This service ensures reliable HVAC system operation with covered component replacement.
Check-in Location
HVAC capacitor testing with clamp meter and wires
HVAC capacitor testing with clamp meter and wiresDual round capacitor with wiring in HVAC unit
Oscar Gruber
Solace Heating and Air in Williston, TN, cleared and cleaned a dryer vent to improve airflow and reduce fire risk. This service helps maintain dryer efficiency and safety in residential properties.
Check-in Location
Dryer vent duct secured to wall with clamp
Dryer vent duct secured to wall with clampDryer vent duct with metal clamp in laundry areaDryer vent duct cleaned inside wooden floor cavityDryer vent duct interior cleaned and clearedDryer vent outlet on exterior wooden wall
Alex Martin
Solace Heating and Air provides cooling system maintenance in Memphis, TN. They clean condenser units, check electrical components, inspect refrigerant levels, and flush drain lines. They test motor performance, airflow, thermostat operation, and system temperatures to ensure efficient and safe cooling operation.
Check-in Location
Furnace system with ductwork and insulation in utility room
Furnace system with ductwork and insulation in utility roomFurnace system with ductwork and ventilation maintenance
Alex Martin
Solace Heating and Air performed cooling maintenance in Memphis, TN. They cleaned the condenser, checked capacitors and refrigerant charge, measured compressor and fan motor amps, flushed the drain line, inspected coils and electrical connections, verified thermostat and system operation, and evaluated overall system condition for efficiency and potential issues.
Check-in Location
Air vent temperature check with infrared thermometer
Air vent temperature check with infrared thermometerCondenser units on outdoor HVAC system during maintenance
Alex Martin
Solace Heating and Air in Memphis, TN inspected a failed 3-ton 410A compressor causing no air conditioning. They found the condenser capacitor and contactor out of specification and identified low return air ductwork. A full repair estimate was prepared with notes on uncertainty about refrigerant levels and possible additional repairs.
Check-in Location
Air handler unit with ductwork and repair tools
Air handler unit with ductwork and repair tools3 ton AC condenser with diagnostic gauges connected
Alex Martin
Solace Heating and Air in Memphis, TN cleared a backed-up condensate line causing backflow and safety switch trips. They identified a 3/4-inch condensate drain line installed out of code that requires proper plumbing tie-in. The system now drains correctly after service.
Check-in Location
Condensate drain line with trapped water in cleanout
Condensate drain line with trapped water in cleanoutCondensate drain line with backup in emergency pan
Alex Martin
Solace Heating and Air in Memphis, TN inspected an AC system with a burnt-out compressor and an open condenser left unused for over a year. They recommend a comfort advisor to assess and estimate a system replacement due to the unit’s age and repair costs.
Check-in Location
AC condenser unit missing compressor and cover outdoors
AC condenser unit missing compressor and cover outdoorsAC compressor with wiring and condenser coil outdoors
Alex Martin
Solace Heating and Air in Moscow, TN performed cooling system maintenance. They cleaned the condenser, checked capacitors, refrigerant levels, and electrical components. They flushed the drain line, inspected coils, and verified thermostat and system operation. They identified a refrigerant leak in a mini-split system and added refrigerant to restore proper function.
Check-in Location
MR Cool Mini Split refrigerant line with frost buildup
MR Cool Mini Split refrigerant line with frost buildupMr Cool mini split condenser unit with service hoses
Alex Martin
Solace Heating and Air provides cooling maintenance in Memphis, TN. Technicians clean condenser units, inspect electrical components, check refrigerant levels, and flush drain lines. They measure system performance and verify thermostat operation to ensure efficient and safe air conditioning function.
Check-in Location
Air duct interior with dust and debris buildup
Air duct interior with dust and debris buildupAttic corner with rodent nest debris buildupFurnace system with ventilation and water heater units
Oscar Gruber
Solace Heating and Air replaced a dead compressor capacitor to restore cooling function. They inspected all electrical connections, components, the air filter, and refrigerant levels. This service ensures HVAC systems operate properly in Memphis, TN.
Check-in Location
HVAC air vent temperature check with infrared thermometer
HVAC air vent temperature check with infrared thermometerCompressor capacitor testing with digital clamp meterCompressor capacitors and electrical testing tools on AC unitCompressor capacitor with electrical wiring in HVAC unitRefrigerant manifold gauge measuring AC system pressures
Oscar Gruber
Solace Heating and Air in Memphis, TN inspected and tested electrical components, replacing the dual run capacitor in the main downstairs unit. They checked filters, blower wheel, evaporator and condenser coils, confirmed normal system operation, and installed three pan switches to ensure proper function.
Check-in Location
Air vent temperature check with infrared thermometer
Air vent temperature check with infrared thermometerHVAC air filter being held for replacement in atticDual run capacitors on gravel with test leadsDual run capacitor testing with digital multimeterBlower wheel inside HVAC air handler unit
Alex Martin
Solace Heating and Air replaced 10 supply ducts in Memphis, TN. They removed crushed flex ducts and installed new ducts with proper inner liners. The team secured the ductwork to meet code and maintain airflow to two kitchen supply registers.
Check-in Location
10-inch supply duct replaced and strapped in attic
10-inch supply duct replaced and strapped in atticSupply duct replaced and strapped to code specifications
Alex Martin
Solace Heating and Air inspected an HVAC system in Memphis, TN, finding low R22 refrigerant levels and multiple leaks. They identified disconnected supply ducts blowing into the attic and a condensate drain line not meeting code. Due to a disconnected flue vent pipe causing carbon monoxide risk, they shut off the gas and furnace valves and recommended a system replacement estimate.
Check-in Location
Furnace flue vent pipe disconnected in attic
Furnace flue vent pipe disconnected in atticR22 refrigerant line with damaged insulation and leaksCondenser unit outside home near fence and brick walkway
Alex Martin
Solace Heating and Air in Memphis, TN replaced a failed capacitor causing AC failure. They also enrolled the customer in a maintenance membership to support ongoing system reliability and service.
Check-in Location
AC compressor capacitor with wiring inside unit
AC compressor capacitor with wiring inside unitAir conditioner condenser unit next to brick wall outdoors
Alex Martin
Solace Heating and Air performed a full HVAC system inspection in Millington, TN. They tested heating and cooling functions, verified safety switches, measured temperature differences, checked refrigerant levels and electrical components, and replaced the air filter with a customer-supplied one. The system operates within manufacturer specifications.
Check-in Location
Forced air furnace and ductwork in attic system
Forced air furnace and ductwork in attic systemCentral air conditioner with diagnostic gauges attached outdoors
Alex Martin
Solace Heating and Air in Arlington, TN repaired HVAC issues by sealing return plenums and correcting Y1 and Y2 wire connections. They verified the furnace cooling stages and ensured the thermostat was set correctly for two-stage operation.
Check-in Location
Return air vent temperature checked at 57.6°F
Return air vent temperature checked at 57.6°FTwo-stage furnace wiring and sealed return plenums in attic
Alex Martin
Solace Heating and Air completed cooling system maintenance in Somerville, TN. They cleaned the condenser, checked capacitors, inspected refrigerant levels, measured electrical amp draw, and flushed the condensate drain. The team inspected coils, airflow, electrical connections, thermostat operation, and overall system performance to ensure reliable cooling.
Check-in Location
Furnace condensate drain line with PVC piping and insulation
Furnace condensate drain line with PVC piping and insulationCondenser units air conditioner maintenance near brick wall
Alex Martin
Solace Heating and Air in Germantown, TN diagnosed an upstairs AC system low on refrigerant due to a leak. They cleaned the condenser, added R-410A refrigerant for temporary cooling, and used an electronic leak detector. They also offered a system replacement estimate.
Check-in Location
Upstairs air handler with refrigerant leak and frozen coil
Upstairs air handler with refrigerant leak and frozen coilUpstairs evaporator coil with insulation damage and frost buildup
Alex Martin
Solace Heating and Air performed cooling system maintenance in Shelby County, TN. The service included cleaning the condenser, checking capacitors and refrigerant levels, measuring electrical and temperature readings, inspecting coils and filters, flushing drain lines, and verifying thermostat and motor functions to ensure safe and efficient operation.
Check-in Location
Furnace units with vent and PVC drainage pipes
Furnace units with vent and PVC drainage pipesLennox condenser units cleaned and inspected outdoors
Alex Martin
Solace Heating and Air performed cooling system maintenance in Germantown, TN. The service included cleaning the condenser unit, checking capacitors, inspecting refrigerant levels, measuring electrical amp draw, flushing drain lines, verifying thermostat and electrical connections, and evaluating system performance to prevent breakdowns.
Check-in Location
Evaporator coil and copper tubing with condensation droplets
Evaporator coil and copper tubing with condensation dropletsFurnace system with PVC vent and insulated ducts
Alex Martin
Solace Heating and Air in Memphis, TN provides condensate pump replacement under warranty and performs comprehensive summer HVAC maintenance. Services include cleaning condenser units, checking electrical components, inspecting refrigerant levels, flushing drain lines, verifying thermostat function, and assessing overall system condition for reliable cooling performance.
Check-in Location
HVAC air filter removed showing dirt buildup
HVAC air filter removed showing dirt buildupCondensate pump flooded drain pan with stagnant water
Alex Martin
Solace Heating and Air performed cooling maintenance in Shelby County, TN. They cleaned the condenser unit, checked capacitors, inspected refrigerant levels, tested electrical components, flushed the drain line, and verified thermostat operation. They ensured proper airflow, system efficiency, and identified potential issues to prevent future breakdowns.
Check-in Location
Condenser unit cleaned and inspected for efficiency
Condenser unit cleaned and inspected for efficiencyHVAC furnace unit inspection and maintenance in attic
Alex Martin
Solace Heating and Air performed cooling system maintenance in Memphis, TN. They cleaned the condenser unit, inspected electrical components, tested cooling performance, flushed the drain line, and replaced damaged condenser panels. The service ensured proper airflow, reliable operation, and early detection of potential issues.
Check-in Location
Outdoor air conditioner condenser unit with damaged panels
Michael Alberson
Check-in Location
Oscar Gruber
Solace Heating and Air replaced a faulty contactor in Memphis, TN, restoring proper voltage flow. This repair allowed the unit to operate correctly and cool as expected.
Check-in Location
Contactor replacement on air conditioner condenser unit
Contactor replacement on air conditioner condenser unitAC contactor with wiring and capacitor inside HVAC unitHVAC duct temperature check with handheld meterHVAC capacitor testing with clamp meter on AC unitHVAC capacitor testing with digital clamp meter on unit
Alex Martin
Solace Heating and Air in Memphis, TN performed cooling system maintenance by cleaning the condenser, checking capacitors, verifying refrigerant levels, measuring electrical and temperature functions, inspecting airflow components, and flushing drain lines. They identified low refrigerant and worn capacitors, leading to a replacement estimate.
Check-in Location
Condenser unit with HVAC tools on top outside house
Alex Martin
Solace Heating and Air performed cooling maintenance in Arlington, TN, cleaning the condenser unit and flushing the evaporator drain line. They inspected electrical components, refrigerant charge, airflow, and thermostat operation to ensure safe and efficient system performance. They checked for early signs of potential breakdowns.
Check-in Location
Air conditioner condenser unit cleaning and inspection
Alex Martin
Solace Heating and Air in Collierville, TN performed cooling maintenance by cleaning the condenser unit, checking capacitors and refrigerant charge, measuring electrical components, inspecting airflow and drainage, verifying thermostat function, and evaluating overall system condition to ensure safe and efficient operation.
Check-in Location
Condenser unit with attached HVAC gauges on grass
Condenser unit with attached HVAC gauges on grassFurnace unit and ductwork in attic space
Alex Martin
Solace Heating and Air in Collierville, TN performs cooling maintenance by cleaning condenser units, checking capacitors, refrigerant levels, and electrical components. They inspect airflow, drain lines, coils, and thermostat functions. The service includes measuring system performance and identifying potential issues to maintain efficient and safe operation.
Check-in Location
American Standard condenser unit cleaning and inspection outdoors
Alex Martin
Solace Heating and Air performed cooling system maintenance in Olive Branch, MS. The service included cleaning the condenser, checking capacitors, refrigerant levels, electrical components, thermostat function, and airflow. They flushed the condensate drain and inspected coils to ensure proper cooling and prevent damage.
Check-in Location
Goodman condenser units outside residential home
Goodman condenser units outside residential homeFurnace system maintenance in attic with ductwork
Oscar Gruber
Solace Heating and Air in Memphis, TN inspected electrical connections, filter, blower wheel, evaporator coil, and condenser coil on May 27, 2026. All components passed manufacturer specifications, ensuring efficient cooling during the summer season and advising regular filter changes to maintain system performance.
Check-in Location
HVAC air vent temperature check with infrared thermometer
HVAC air vent temperature check with infrared thermometerAC capacitor testing with digital clamp meter on unitEvaporator coil inside HVAC unit with foil insulationCondenser coil unit on rooftop HVAC system inspectionAir handler unit with electrical and coil inspection
Alex Martin
Solace Heating and Air performed cooling maintenance in Lakeland, TN. They cleaned the condenser, checked capacitors, inspected refrigerant levels, measured motor amp draw, flushed the drain line, and verified thermostat function. They also inspected electrical connections, system operation, and recommended contactor replacement.
Check-in Location
Condenser units outdoors with system maintenance checks
Alex Martin
Solace Heating and Air inspected and repaired an HVAC system in Mason, TN. They verified proper condenser disconnect wiring, tested capacitors and thermostat wiring, and replaced the blower motor capacitor and thermostat to restore correct system startup and shutdown functions.
Check-in Location
Thermostat control panel on beige wall, 82°F displayed
Thermostat control panel on beige wall, 82°F displayedBlower motor capacitor testing with clamp meter
Alex Martin
Solace Heating and Air fixed a backup in the 1.5-inch condensate drain line stack in Memphis, TN. They inspected the drain line fall and safety shutoff switches. Plumbers were scheduled to clear the drain line stack to stop overflow into the emergency drain pan.
Check-in Location
Condensate drain line stack and emergency drain pan overflow
Condensate drain line stack and emergency drain pan overflowCondensate drain line joint wrapped with plastic and clampCondensate drain line stack with water overflow
Alex Martin
Solace Heating and Air performed cooling maintenance in Memphis, TN. They cleaned the condenser unit, checked capacitors and refrigerant levels, measured electrical components, inspected airflow elements, flushed the condensate drain, verified thermostat function, and evaluated overall system condition to ensure safe, efficient cooling operation.
Check-in Location
HVAC air filters replacement with dirty and clean filters
HVAC air filters replacement with dirty and clean filtersReturn plenum with duct connection and insulationAir filters showing clean and used comparison
Alex Martin
Solace Heating and Air performed comprehensive cooling maintenance in Bartlett, TN, including condenser cleaning, capacitor and refrigerant checks, amp draw measurements, condensate drain flushing, and coil inspections. They tested thermostat operation, replaced the air filter, identified a blower motor issue needing replacement, and detected a water heater leak, advising prompt homeowner action to prevent damage.
Check-in Location
Water heater rusted leak along tank seam
Water heater rusted leak along tank seamFurnace and duct system with vent and pipes visible
Alex Martin
Solace Heating and Air in Collierville, TN diagnosed a system freeze causing the drain pan to overflow and damage the garage ceiling. The unit had extremely low refrigerant. They advised a replacement estimate due to the system's age after inspection.
Check-in Location
Drain pan with water overflow inside HVAC unit
Drain pan with water overflow inside HVAC unitEvaporator coil with frost and rust buildupDrain pan water damage on ceiling in garage
Alex Martin
Solace Heating and Air provides cooling system maintenance in Shelby County, TN. They clean condenser units, inspect electrical components, check refrigerant levels, replace air filters, and flush drain lines. They test system performance to ensure safe operation and prevent damage, helping maintain efficient and reliable cooling.
Check-in Location
Air conditioner capacitor and wiring connections close-up
Air conditioner capacitor and wiring connections close-upCondenser units with outdoor electrical disconnect and wiringAir filter replacement for HVAC system maintenance
Oscar Gruber
Solace Heating and Air in Atoka, TN inspected electrical connections and HVAC components, including filters, blower wheels, and coils. They found normal operation but noted corrosion on the downstairs condenser coil and recommended installing pan switches for both systems.
Check-in Location
Downstairs condenser coil corrosion on HVAC unit exterior
Downstairs condenser coil corrosion on HVAC unit exteriorCeiling air vent temperature check with infrared toolFurnace and ductwork with PVC and metal pipingCondenser coil with clamp meter testing electrical componentsDownstairs condenser coil with corrosion near brick wall
Oscar Gruber
Solace Heating and Air in Memphis, TN replaced a clogged 16x25x1 air filter that caused coil freezing and drain pan flooding. They checked refrigerant pressures and restored the system to normal cooling operation.
Check-in Location
Thermostat wall unit displaying temperature setting
Thermostat wall unit displaying temperature settingThermostat display showing set temperature at 70°FAir vent temperature check with infrared thermometerHVAC air filters showing clean and clogged conditionFurnace system with wiring and vent pipe installation
Oscar Gruber
Solace Heating and Air inspected and tested all electrical components in a Memphis, TN, heating and cooling system. They checked the filter, blower wheel, evaporator coil, and condenser coil. The system operated normally, and they recommended installing a surge protector.
Check-in Location
Air vent temperature check using infrared thermometer
Air vent temperature check using infrared thermometerElectrical connections testing on HVAC unit with meterClamp meter on HVAC condenser electrical systemHVAC air filter installed near furnace unitCondenser coil and air conditioner unit outdoors
Oscar Gruber
Solace Heating and Air serviced an HVAC unit in Germantown, TN. They tested all electrical connections and components, replaced a customer-supplied 20x25x1 air filter, and inspected the blower wheel, evaporator coil, and condenser coil. The unit operated and cooled normally after the service.
Check-in Location
HVAC air vent temperature check with infrared gun
HVAC air vent temperature check with infrared gunA/C unit electrical clamp meter testing on condenser fanClamp meter measuring AC condenser fan currentAir conditioner condenser with diagnostic gauges attachedHVAC unit air filters, new and used side by side
Alex Martin
Solace Heating and Air replaced two air filters, sizes 16x25x1 and 16x20x1, and updated the thermostat filter change reminder in Germantown, TN. The team followed the approved work estimate to ensure proper HVAC maintenance and system efficiency.
Check-in Location
HVAC air filters 16x20x1 and 16x25x1 replacement
HVAC air filters 16x20x1 and 16x25x1 replacementFurnace air filters 16x25x1 and 16x20x1 replacement
Alex Martin
Solace Heating and Air cleared a backed-up condensate drain line and emergency drain pan in Collierville, TN. They also checked the refrigerant charge on the HVAC system and advised corrective work to bring the drain stack within code for proper evaporator drainage.
Check-in Location
Brown HVAC compressor on wet concrete floor
Brown HVAC compressor on wet concrete floor34 condensate drain line with water overflow34 condensate drain line overflow in emergency pan
Alex Martin
In Memphis, TN, Solace Heating and Air repaired a frozen HVAC system with a bypassed zone board and removed zone dampener. They addressed restricted airflow, a failing blower motor, and low 410a refrigerant. They recommended a system replacement estimate due to the system's age and needed repairs.
Check-in Location
Air conditioner refrigerant lines iced over outside unit
Air conditioner refrigerant lines iced over outside unitFrozen air conditioning refrigerant lines in attic systemDuctwork with damaged insulation and tape peeling
Alex Martin
Solace Heating and Air performed comprehensive cooling maintenance in West Memphis, AR. They cleaned the condenser, tested electrical components, inspected refrigerant levels, flushed the drain line, and replaced the air filter. They also checked thermostat function and system operation to ensure efficient and safe cooling.
Check-in Location
Air filter clogged with dust and debris buildup
Air filter clogged with dust and debris buildup20x25x1 Air Filter Replacement with Polarized MediaAir handler unit with refrigerant line insulation installation
Alex Martin
Solace Heating and Air serviced a condensate line backup in Southaven, MS. They cleared the downstairs system’s clogged condensate line to stop overflow and water damage. The team noted missing condensate safety shutoffs and repaired unsecured emergency drain line PVC. The customer enrolled in maintenance membership.
Check-in Location
Downstairs HVAC condensate drain line overflow and leak
Downstairs HVAC condensate drain line overflow and leakDownstairs HVAC condensate line with unglued PVC joints
Alex Martin
Solace Heating and Air in Memphis, TN services air conditioning units by diagnosing issues such as locked condenser fan motors and faulty capacitors. They inform customers about R22 refrigerant discontinuation and provide estimates for system replacement when repairs cannot guarantee cooling performance.
Check-in Location
Condenser fan and capacitor on R22 AC unit
Alex Martin
Solace Heating and Air in Memphis, TN inspected a downstairs AC system with a failed indoor blower motor and broken control board connector. They replaced both the control board and blower motor to restore the system’s function. Parts were ordered, and repairs are scheduled to complete the service.
Check-in Location
Dirty HVAC air duct interior before cleaning
Dirty HVAC air duct interior before cleaningHVAC control board with broken pin connector and wiring
Oscar Gruber
Solace Heating and Air serviced a cooling unit in Germantown, TN, by diagnosing a faulty dual run capacitor. They replaced the capacitor, restoring normal operation and cooling performance to the downstairs HVAC system.
Check-in Location
Dual run capacitor testing with digital clamp meter
Dual run capacitor testing with digital clamp meterDual run capacitor on HVAC unit with multimeter testingDual run capacitor replacement in HVAC unit wiring panelRefrigerant manifold gauge measuring air conditioner pressuresFloor vent temperature reading with infrared thermometer
Alex Martin
Solace Heating and Air repaired a no-cooling issue in Memphis, TN, by replacing a failed condenser contactor and dual run capacitor. They tested the refrigerant charge and restored the system to normal operation. The customer also enrolled in a maintenance membership for ongoing system care.
Check-in Location
Dual run capacitor and condenser contactor in AC unit
Oscar Gruber
Solace Heating and Air in Memphis, TN serviced an HVAC system by testing all electrical connections, replacing a 16x25x1 filter, and inspecting the blower wheel and coils. They confirmed the system’s normal operation and recommended adding a surge protector and pan switch for protection.
Check-in Location
16x25x1 Air filters new and used side by side
16x25x1 Air filters new and used side by sideAC unit capacitor with digital clamp meter measurementAC capacitor testing with digital clamp meterCeiling air vent temperature check with infrared thermometerBlower wheel and motor assembly inside HVAC system
Oscar Gruber
Solace Heating and Air inspected electrical connections and components in Olive Branch, MS. They replaced the downstairs dual run capacitor, checked filters, blower wheels, evaporator and condenser coils, and confirmed both systems run and cool normally. They recommended replacing the upstairs capacitor and pan switches.
Check-in Location
Dual run capacitor testing with clamp meter
Dual run capacitor testing with clamp meterDual run capacitor testing on HVAC condenser fanDual run capacitors for HVAC system maintenanceDual run capacitor with wiring on HVAC condenser unitBlower wheel inside HVAC system housing close-up
Alex Martin
Solace Heating and Air in Oakland, TN performs comprehensive cooling maintenance. They clean condenser units, check capacitors and refrigerant charge, measure electrical amp draw, inspect airflow components, flush drain lines, verify thermostat and system operation, and assess overall system condition to ensure safe, efficient cooling performance.
Check-in Location
Condenser unit with outdoor disconnect and wiring
Condenser unit with outdoor disconnect and wiringFurnace unit with ductwork and ventilation pipes
Oscar Gruber
Solace Heating and Air in Olive Branch, MS replaced a faulty control board and pan switch to restore proper blower motor function. This repair fixed the condenser running without the indoor fan, ensuring the HVAC unit cools and operates correctly.
Check-in Location
HVAC control board with wiring connections
HVAC control board with wiring connectionsControl board replacement for HVAC blower motor systemHVAC control board with wiring and digital displayCeiling vent temperature check with infrared thermometerBlower motor wheel and wiring in HVAC unit
Alex Martin
Solace Heating and Air in Memphis, TN replaced a failed condenser fan motor and a faulty contactor to restore air conditioning function. The technician informed the customer about possible refrigerant issues due to system age and enrolled them in a maintenance membership for ongoing support.
Check-in Location
Alex Martin
Solace Heating and Air provided cooling system maintenance in Germantown, TN. They cleaned the condenser, checked capacitors, inspected refrigerant levels, and measured electrical components for safety. The service included flushing the drain line, replacing air filters, and evaluating system performance to prevent future breakdowns.
Check-in Location
Furnace and water heater setup in attic space
Furnace and water heater setup in attic spaceGas furnace air intake and vent pipes in attic
Alex Martin
Solace Heating and Air in Memphis, TN performed cooling system maintenance by cleaning the condenser unit, inspecting electrical components, verifying refrigerant levels, and flushing the evaporator drain line. They replaced the air filter and batteries and checked system operation to ensure efficient and safe performance.
Check-in Location
Furnace and ductwork in attic HVAC system maintenance
Alex Martin
Solace Heating and Air in Lakeland, TN provides duct cleaning estimates and offers full system duct cleaning services. They install indoor air quality products to enhance system efficiency and improve air quality throughout the whole house.
Check-in Location
HVAC air filter heavily coated with dust dirt
HVAC air filter heavily coated with dust dirtHVAC duct interior with light beam and metal collarHVAC duct interior showing dust buildup and debrisReturn air duct with dirty air filter in atticGoodman furnace and duct system in attic space
Oscar Gruber
Solace Heating and Air inspected and tested all electrical connections and components in Memphis, TN. They replaced a faulty dual run capacitor and checked the filters, blower wheel, evaporator coil, and condenser coil. The system operates normally and cools effectively.
Check-in Location
Dual run capacitor replacement for HVAC system
Dual run capacitor replacement for HVAC systemHVAC vent temperature check with infrared thermometerHVAC blower motor and fan assembly close-up viewCondenser coil and dual run capacitor in HVAC unitDual run capacitor testing with clamp meter
Oscar Gruber
Solace Heating and Air inspected all electrical components of the HVAC unit in Shelby County, TN. They replaced one customer-supplied filter, cleaned the condenser coil, and confirmed the system operates normally. They recommended installing a surge protector and replacing the dual run capacitor.
Check-in Location
Air conditioner condenser coil cleaning and inspection
Air conditioner condenser coil cleaning and inspectionDual run capacitor testing with digital multimeterDual run capacitor testing with clamp meter on AC unitAir conditioner filters positioned near HVAC unit interiorCeiling air vent temperature checking with laser thermometer
Alex Martin
Solace Heating and Air in Memphis, TN performed cooling maintenance that included cleaning the condenser unit, inspecting capacitors and refrigerant charge, measuring electrical components, flushing the condensate drain, and replacing two air filters. They verified system operation and checked for potential issues to maintain efficient cooling.
Check-in Location
16x25x1 air filter being replaced in HVAC system
16x25x1 air filter being replaced in HVAC system16x25x1 HVAC air filter replaced during maintenance
Alex Martin
Solace Heating and Air in Memphis, TN conducted thorough cooling maintenance by cleaning condensers, inspecting electrical components, verifying refrigerant levels, flushing drain lines, and replacing filters. They measured airflow and system performance to ensure efficient, safe cooling during Memphis’s hot summers.
Check-in Location
Air filter replacement 16x25x1 in HVAC system
Air filter replacement 16x25x1 in HVAC system16x25x1 HVAC air filter replaced, dusty condition
Alex Martin
Solace Heating and Air provided cooling system maintenance in Memphis, TN. They cleaned the condenser, checked capacitors and refrigerant levels, measured electrical amp draw, flushed the drain line, inspected coils and airflow, tested thermostat and electrical connections, verified motor and compressor function, and installed a furnace surge protector.
Check-in Location
Condenser unit maintenance with protective cage installed
Alex Martin
Solace Heating and Air performed cooling system maintenance in Germantown, TN. They cleaned the condenser, inspected electrical components, verified refrigerant levels, and replaced air filters. They ensured proper airflow, checked thermostat function, flushed drain lines, and tested system performance for safe and efficient operation.
Check-in Location
American Standard condenser units outside home
Alex Martin
Solace Heating and Air in Marion, AR corrected a previous installation that used an improperly sized blower motor. They ensure the blower motor fits the system to improve heating and air conditioning function.
Check-in Location
Gas furnace with ductwork and vent pipe in attic
Alex Martin
Solace Heating and Air in Germantown, TN diagnosed an R22 HVAC system completely out of refrigerant. They provided a system replacement estimate to the customer, assisting with the transition to a new, functional heating and cooling unit.
Check-in Location
R22 air conditioning unit with diagnostic gauges attached
Oscar Gruber
Solace Heating and Air in Memphis, TN inspected all electrical connections and components, tested the filter, blower wheel, evaporator coil, and condenser coil. They verified the system's cooling and operation. They recommended installing a pan switch and surge protector for continued safety and performance.
Check-in Location
Capacitor and multimeter testing on HVAC unit
Capacitor and multimeter testing on HVAC unitClamp meter testing HVAC capacitor readingsCeiling air vent temperature check with infrared gunDigital clamp meter measuring HVAC system currentHVAC electrical connections testing with multimeter clamp
Alex Martin
Solace Heating and Air inspected three outside condensers in Germantown, TN, identified low R22 refrigerant levels causing freezing issues, and offered a Comfort Advisor and Peace of Mind maintenance plan for ongoing system support.
Check-in Location
Furnace and ductwork inspection in attic space
Furnace and ductwork inspection in attic spaceR22 Refrigerant Low on Three Outdoor A/C Condensers
Oscar Gruber
Solace Heating and Air inspected all electrical connections and system components in Olive Branch, MS. They tested the blower capacitor, filter, blower wheel, evaporator coil, and condenser coil. The system operates normally. They recommended replacing the blower capacitor and installing a surge protector.
Check-in Location
Blower capacitor testing with digital multimeter
Blower capacitor testing with digital multimeterBlower capacitor electrical testing on HVAC unitAir vent temperature check with infrared thermometerAir conditioner condenser coil water washed and inspectedAir handler air filter with wiring and warning label
Oscar Gruber
Solace Heating and Air inspected and tested all electrical connections and components in Fayette County, TN. They replaced two AprilAire 413 units, cleaned condenser coils, and checked blower wheels and evaporator coils. Both systems operate normally and estimates for indoor air quality products were provided.
Check-in Location
AprilAire 413 air conditioners with cleaned coils outdoors
AprilAire 413 air conditioners with cleaned coils outdoorsDigital clamp meter measuring HVAC electrical currentAir conditioner capacitor with wiring connectionsAprilAire 413 air conditioner condenser coils cleanedFurnace blower wheel inside HVAC unit close-up
Oscar Gruber
Solace Heating and Air in Memphis, TN inspected electrical connections and components, cleaned the condenser coil, and checked the filter, blower wheel, and evaporator coil. They confirmed the system operates normally and recommended adding a surge protector and indoor air quality products.
Check-in Location
HVAC vent temperature testing with handheld meter
HVAC vent temperature testing with handheld meterHVAC electrical connections tested with clamp meterAC capacitor electrical testing with clamp meter outdoorsOutdoor air conditioning condenser unit with electrical boxCentral air conditioner unit with cleared condenser coil
Oscar Gruber
Solace Heating and Air inspected HVAC electrical components and filters in Millington, TN. They found both blower capacitors faulty and removed debris blocking airflow. The systems operate with reduced efficiency due to worn parts. They provided an estimate for a free in-home consultation to address these issues.
Check-in Location
Thermostat laser temperature measurement in dark room
Thermostat laser temperature measurement in dark roomEvaporator coil inspection with borescope cameraBlower capacitor testing on HVAC condenser unitHVAC air filter held for replacement in attic spaceBlower motor and capacitor wiring in HVAC system
Alex Martin
Solace Heating and Air in Southaven, MS performs comprehensive cooling maintenance. They clean condenser units, check capacitors and refrigerant levels, inspect electrical components, flush drain lines, and verify thermostat and system operation. This service ensures efficient airflow, safe electrical function, and early detection of potential issues.
Check-in Location
Condenser unit cleaning and maintenance on outdoor AC system
Alex Martin
Solace Heating and Air in Williston, TN replaced a failed condenser capacitor to restore air conditioning. They checked refrigerant levels, measured temperature difference, verified zone operations, and inspected filter cleanliness. They also identified a contactor out of manufacturer specifications and recommended its replacement.
Check-in Location
Condenser capacitor and wiring in HVAC unit
Oscar Gruber
Solace Heating and Air inspected and tested electrical components in Germantown, TN, replacing one dual run capacitor. They changed two customer-supplied filters, cleaned blower wheels and coils, and confirmed both systems operate and cool normally. Surge protectors were recommended for outdoor units.
Check-in Location
Ceiling air vent temperature check with infrared gun
Ceiling air vent temperature check with infrared gunAir conditioner outdoor units with new capacitor and filtersDual run capacitors side by side on white surfaceDual run capacitor and electrical wiring in HVAC unitHVAC air filters ready for replacement on wood floor
Oscar Gruber
Solace Heating and Air replaced clogged air filters and checked the refrigerant charge in an upstairs HVAC unit in Germantown, TN. They restored proper airflow to stop the system from freezing and recommended surge protectors to protect the equipment.
Check-in Location
Air filter replacement with clogged and clean filters
Air filter replacement with clogged and clean filtersFurnace air filters replaced, airflow restoredAir conditioner refrigerant manifold gauge readingsCeiling air vent temperature check with laser thermometerAir conditioner with refrigerant gauge and hoses
Oscar Gruber
Solace Heating and Air inspected and tested electrical components in Oakland, TN. They identified failing dual run capacitors and recommended replacements. They cleaned condenser coils and checked filters, blower wheels, and evaporator coils. Both systems operated normally during evaluation. Safety switches were also recommended for both units.
Check-in Location
Air vent temperature check with infrared thermometer
Air vent temperature check with infrared thermometerDual run capacitors in outdoor HVAC unitsDual run capacitor testing on HVAC condenser unitFurnace electrical connections and dual run capacitorsHVAC air filter held during inspection and replacement
Oscar Gruber
Solace Heating and Air in Memphis, TN inspected electrical connections, filters, blower wheels, evaporator coils, and condenser coils. They tested components to meet manufacturer specifications and confirmed both systems operate and cool normally. Surge protectors and safety switches were recommended for homeowner safety.
Check-in Location
Air vent temperature check with infrared thermometer
Air vent temperature check with infrared thermometerHVAC vent temperature check with handheld infrared toolHVAC capacitor testing with multimeter on gravel groundCapacitor testing with digital multimeter on HVAC systemFurnace electrical components and pipes in basement
Oscar Gruber
Solace Heating and Air in Memphis, TN, inspects electrical connections and mechanical parts to ensure they meet manufacturer specifications. They replace air filters, inspect blower wheels, evaporator and condenser coils, and verify unit operation. They also recommend surge protectors and chemical cleaning for outdoor units.
Check-in Location
HVAC vent temperature reading with infrared thermometer
HVAC vent temperature reading with infrared thermometerClamp meter measuring HVAC electrical current at outdoor unitAir filter replacement for HVAC system maintenanceCondenser coil and outdoor AC unit inspectionAC condenser unit clamp meter testing and inspection
Oscar Gruber
Solace Heating and Air in Memphis, TN inspected electrical connections, filters, blower wheel, evaporator coil, and condenser coil. They confirmed systems running and cooling normally except for the dual run capacitor, recommending a surge protector and active media filter installation for optimal performance.
Check-in Location
Dual run capacitor with clamp meter testing
Dual run capacitor with clamp meter testingHVAC dual run capacitor voltage testing with meterDual run capacitor testing with clamp meter on HVAC unitDual run capacitor on Carrier air conditioner unitHVAC vent temperature check with infrared thermometer
Oscar Gruber
Solace Heating and Air inspected all electrical connections and components in Piperton, TN. They cleaned filters, blower wheels, evaporator coils, and condenser coils. Both systems were tested and confirmed to operate and cool normally. A pan overflow switch was recommended for each system.
Check-in Location
Air vent temperature reading with infrared thermometer
Air vent temperature reading with infrared thermometerElectrical connections multimeter testing on HVAC systemCapacitor testing with clamp meter on HVAC unitCondenser coil unit exterior with fan grille and wiringFurnace system with ductwork and piping in attic space
Alex Martin
Solace Heating and Air conducted comprehensive cooling maintenance in Munford, TN, including cleaning the condenser to optimize airflow, verifying capacitor ratings, inspecting refrigerant levels to maintain cooling capacity, and measuring electrical amp draw for safety. They flushed the drain line, inspected coils and plenums for airflow issues, confirmed thermostat operation, and evaluated system condition to prevent breakdowns and ensure efficient summer comfort.
Check-in Location
Condenser unit cleaning and inspection for airflow
Oscar Gruber
Solace Heating and Air inspected electrical connections and HVAC components in Memphis, TN. They tested filters, blower wheels, evaporator coils, and condenser coils, confirming both units operated and cooled normally. They recommended installing a new AprilAire 213 humidifier and a pan overflow switch.
Check-in Location
AC motor capacitors with silicone sealant tube
AC motor capacitors with silicone sealant tubeHVAC capacitor with connected electrical wiringAir conditioner electrical connections testing with multimeterAir vent temperature checked with infrared thermometerAC capacitor testing with clamp meter outdoors
Oscar Gruber
Solace Heating and Air in Memphis, TN inspected electrical connections, filter, blower wheel, evaporator coil, and condenser coil, confirming all components met manufacturer specs. System operation tests showed normal cooling efficiency. They also installed a pan overflow switch to enhance safety.
Check-in Location
HVAC pan overflow switch and electrical connections
HVAC pan overflow switch and electrical connectionsCapacitor testing on HVAC condenser unit fanLennox outdoor AC condenser with electrical checkAir vent temperature check with infrared thermometerAC unit electrical connections with clamp meter testing
Oscar Gruber
Solace Heating and Air in Memphis, TN inspected electrical connections, replaced and cleaned filters, evaporator coils, blowers, and condenser coils. They tested system operation, confirming heating and cooling systems meet manufacturer specifications for optimal performance.
Check-in Location
Evaporator coil chemical cleaning in HVAC unit
Evaporator coil chemical cleaning in HVAC unitEvaporator coil cleaning inside HVAC unitAC unit electrical current testing with clamp meterFloor vent temperature check with infrared thermometerAir conditioner unit outdoor condenser with HVAC tool bag
Oscar Gruber
Solace Heating and Air in Memphis, TN inspects furnaces by checking electrical connections, system operation, heat exchangers, and carbon monoxide levels. They ensure components meet manufacturer specifications and recommend blower wheel cabinet cleaning when needed.
Check-in Location
Furnace heat exchanger inspection endoscope view
Furnace heat exchanger inspection endoscope view1999 Furnace unit with vent and pipes in closetElectrical clamp meter on furnace wiringCarbon monoxide monitor testing near ceiling ventCeiling air vent temperature check with infrared thermometer
Michael Alberson
Solace Heating and Air resolved a kitchen line stoppage in Memphis, TN. They quickly identified the blockage and restored proper flow to the kitchen plumbing system, ensuring normal operation and preventing further issues.
Check-in Location
Michael Alberson
Solace Heating and Air in Germantown, TN replaces fill valves in toilets. They install new valves to ensure proper water flow and prevent leaks. This service improves toilet function and helps maintain plumbing efficiency in homes.
Check-in Location
Michael Alberson
Solace Heating and Air performed a backflow replacement and repaired two copper spots on Yale Road, TN. They replaced the backflow device and fixed copper pipe damages efficiently to ensure proper system function and safety.
Check-in Location
Copper water pipes with backflow and spot repairs
Copper water pipes with backflow and spot repairsCopper plumbing pipe with repaired elbow jointBackflow preventer with copper pipe spot repairsBackflow preventer with copper pipe repairs in utility room
Oscar Gruber
Solace Heating and Air inspected all electrical connections, filter, blower wheel, evaporator coil, and condenser coil in Memphis, TN. They confirmed the system operates within manufacturer specifications and recommended installing a surge protector for the outdoor unit to protect the HVAC system.
Check-in Location
Air vent temperature check with infrared thermometer
Air vent temperature check with infrared thermometerHVAC outdoor unit electrical testing with clamp meterOutdoor air conditioner electrical testing with multimeterAir conditioner condenser unit beside brick wall outdoorsAir conditioner condenser unit with multimeter and wire stripper
Oscar Gruber
Solace Heating and Air repaired a thermostat power issue in Hernando, MS, caused by a blocked 3/4-inch drain line. They cleared the drain with nitrogen, allowing proper drainage and restoring normal cooling and safety switch operation.
Check-in Location
Coil overflow safety switch on HVAC drain line
Coil overflow safety switch on HVAC drain lineCoil overflow switch and PVC drain line in HVAC systemThermostat on wall powering HVAC system offThermostat display showing room temperature at 73°FCoil drain line with overflow switch on HVAC system
Oscar Gruber
Solace Heating and Air inspected electrical components in Rossville, TN, and found the blower and dual run capacitors outside manufacturer specs. They cleaned the condenser coil, checked the filter, blower wheel, and evaporator coil, confirmed normal system operation, and recommended installing a pan overflow switch.
Check-in Location
Air vent temperature check with infrared thermometer
Air vent temperature check with infrared thermometerBlower capacitor testing with digital multimeterBlower capacitor and dual run capacitor testing outside specsCondenser coil and blower capacitor on outdoor AC unitCapacitor testing with Klein Tools digital meter
Alex Martin
Solace Heating and Air provided cooling maintenance in Collierville, TN, including cleaning the condenser unit, checking capacitors, inspecting refrigerant charge, measuring electrical amp draw, flushing the condensate drain, inspecting coils and airflow, verifying thermostat operation, and evaluating overall system condition to ensure efficient and safe performance.
Check-in Location
Furnace unit with PVC condensate drain and vent pipe
Furnace unit with PVC condensate drain and vent pipeCondenser unit with cleaned coils and inspected electrical components
Alex Martin
Solace Heating and Air performed a cooling maintenance service in Oakland, TN. They cleaned the condenser unit, checked capacitors, refrigerant charge, electrical components, and thermostat operation. They flushed the condensate drain line and installed an SS2 condensate safety switch to ensure efficient and safe system performance.
Check-in Location
Condensate drain line with SS2 safety switch installation
Condensate drain line with SS2 safety switch installationGoodman air conditioner condenser with maintenance tools
Alex Martin
Solace Heating and Air in Marion, AR performs cooling maintenance by cleaning condenser units, checking electrical components, inspecting refrigerant levels, and ensuring proper airflow. They measure system performance and verify thermostat function to maintain efficient and safe air conditioning operation.
Check-in Location
Condenser unit cleaning and inspection on outdoor HVAC system
Condenser unit cleaning and inspection on outdoor HVAC systemAir handler unit with service and installation information
Alex Martin
Solace Heating and Air in Oakland, TN performed cooling maintenance by cleaning the condenser unit, inspecting electrical components, and verifying refrigerant levels. They flushed the evaporator drain line, checked airflow, tested system performance, and installed a new SS2 condensate safety switch to ensure reliable operation.
Check-in Location
Goodman condenser unit with cleaning and safety switch installed
Goodman condenser unit with cleaning and safety switch installedFurnace and ductwork inspection with condensate safety switch installation
Alex Martin
Solace Heating and Air offers free duct cleaning estimates in Shelby County, TN. They assess air duct systems to provide accurate pricing and service recommendations. Customers in Shelby County can rely on their expertise for maintaining clean and efficient heating and air systems.
Check-in Location
Gas furnace burner assembly with wiring and pipes
Gas furnace burner assembly with wiring and pipesHVAC duct interior with dust buildup and debrisFlexible duct interior with dust buildup before cleaningHVAC duct openings with dust and debris buildupRusty HVAC heat exchanger with corrosion damage
Alex Martin
Solace Heating and Air performed cooling maintenance in Germantown, TN. They cleaned the condenser unit, checked capacitors and refrigerant charge, measured electrical amp draw, inspected airflow components, flushed the condensate drain line, tested thermostat operation, and evaluated system performance to ensure safe and efficient cooling.
Check-in Location
Condenser unit and compressor maintenance outdoors
Alex Martin
Solace Heating and Air performed cooling maintenance in Munford, TN. The service included cleaning the condenser, checking capacitors and refrigerant levels, measuring electrical components, inspecting airflow and thermostat function, flushing condensate lines, and replacing the downstairs indoor blower motor and contactors for both floors to ensure proper system operation.
Check-in Location
Condenser contactor with corroded wiring and dust buildup
Condenser contactor with corroded wiring and dust buildupCondenser units with maintenance gauges and wiring setupIndoor blower motors and contactors replaced in HVAC system
Alex Martin
Solace Heating and Air replaced broken hard pipe ductwork with six flexible ducts in Memphis, TN. This service improves air distribution and system efficiency by updating outdated or damaged duct components with flexible ductwork.
Check-in Location
Flex ductwork installation in attic space
Alex Martin
Solace Heating and Air performed cooling maintenance in Memphis, TN, including cleaning the condenser, checking capacitors, inspecting refrigerant levels, measuring amp draws, flushing the drain line, and replacing the air filter and blower capacitor to ensure efficient and safe HVAC system operation.
Check-in Location
Air handler filter replacement and capacitor check
Air handler filter replacement and capacitor checkBlower wheel inside HVAC system with light shine
Alex Martin
Solace Heating and Air performs cooling system maintenance in Olive Branch, MS. They clean condenser units, check electrical components, verify refrigerant levels, flush drain lines, inspect coils and airflow, test thermostat function, and assess overall system performance to ensure safe, efficient cooling operation and prevent future breakdowns.
Check-in Location
Condenser unit cleaning and maintenance outdoors
Condenser unit cleaning and maintenance outdoorsGas furnace unit in basement with duct connection
Alex Martin
Solace Heating and Air diagnosed and repaired thermostat error codes in Moscow, TN. They identify the issue quickly and restore proper thermostat function to maintain comfortable indoor temperatures efficiently.
Check-in Location
Air conditioner condenser coil with damaged panel and wiring
Air conditioner condenser coil with damaged panel and wiringRefrigerant line and coil with debris buildup in HVAC system
Alex Martin
Solace Heating and Air performed commercial summer maintenance on a rooftop unit in Collierville, TN. They cleaned condenser coils, inspected the evaporator coil and filter, tested fan motor capacitors, measured electrical components, inspected the blower assembly, verified refrigerant charge, and checked cooling performance.
Check-in Location
Rooftop unit condenser coil and electrical inspection
Rooftop unit condenser coil and electrical inspectionCommercial rooftop unit air filters installed or inspected
Alex Martin
Solace Heating and Air replaced the UV bulb in an indoor air quality system in Memphis, TN. This service improves air purification by ensuring the UV component functions properly, helping maintain cleaner air in residential or commercial spaces.
Check-in Location
UV bulb indoor air quality system with wiring in HVAC unit
UV bulb indoor air quality system with wiring in HVAC unitUV bulb connector for indoor air quality system replacement
Alex Martin
Solace Heating and Air in Memphis, TN performs cooling maintenance by cleaning condenser units, checking capacitors and refrigerant levels, measuring electrical components, inspecting airflow and coils, flushing drain lines, and verifying thermostat and system operation to ensure efficient and safe air conditioning performance.
Check-in Location
Condenser unit cleaning and maintenance outdoors
Condenser unit cleaning and maintenance outdoorsFurnace and air handler unit with PVC piping in basement
Alex Martin
Solace Heating and Air in Collierville, TN, inspected a frozen downstairs HVAC system clogged by black soot from a ventless gas log fireplace. They thawed the system, removed water, and identified heavy contamination in ducts and components. Services included cleaning coils, ductwork, and blower assembly to restore airflow and prevent soot circulation.
Check-in Location
HVAC evaporator coil frozen from airflow restriction
HVAC evaporator coil frozen from airflow restrictionDownstairs HVAC blower wheel with black soot buildupDownstairs HVAC return plenum with heavy soot buildupHVAC return plenum heavily contaminated with black soot
Alex Martin
Solace Heating and Air provided cooling system maintenance in Memphis, TN. The service included cleaning the condenser, inspecting capacitors, checking refrigerant levels, measuring electrical components, flushing the drain line, and replacing the condenser surge protector and capacitor to ensure efficient and safe operation.
Check-in Location
Alex Martin
Solace Heating and Air performed cooling maintenance in Oakland, TN. They cleaned the condenser, checked capacitors, inspected refrigerant charge, measured amp draw, and flushed the condensate drain line. They also tested system temperature, electrical connections, thermostat, and overall system operation to ensure efficient cooling and prevent future breakdowns.
Check-in Location
Alex Martin
Solace Heating and Air in Memphis, TN inspects and verifies the refrigerant charge in HVAC systems. They ensure the system operates with the correct refrigerant level to maintain efficient cooling performance.
Check-in Location
Air vent temperature check with infrared thermometer
Air vent temperature check with infrared thermometerAir vent temperature check with infrared thermometer
Alex Martin
Solace Heating and Air provides cooling system maintenance in Memphis, TN. They clean condenser units, check capacitors and refrigerant levels, measure electrical components, inspect airflow parts, flush drain lines, and verify thermostat and safety operations to ensure efficient and reliable air conditioning performance.
Check-in Location
Furnace unit and vent pipe inspected in attic space
Oscar Gruber
Solace Heating and Air inspected all electrical connections, filters, blower wheel, evaporator coil, and condenser coil in Germantown, TN. They confirmed the unit operates and cools normally and recommended adding a surge protector for the outdoor unit.
Check-in Location
Evaporator coil temperature check with thermal gun
Evaporator coil temperature check with thermal gunElectrical connections tested with clamp meterHVAC condenser coil electrical testing with clamp meterEvaporator coil electrical current testing tool on HVAC unitFurnace with vent pipe and PVC drain lines installed
Oscar Gruber
Solace Heating and Air inspected and tested all electrical connections and components in Collierville, TN. They replaced a customer-supplied air filter, cleaned condenser coils, and checked blower wheels and evaporator coils. Both units were confirmed running and cooling normally. Surge protector installation was recommended for outdoor units.
Check-in Location
Outdoor HVAC condenser units next to brick wall
Outdoor HVAC condenser units next to brick wallCeiling air vent temperature checked with infrared thermometerHVAC air filters next to Goodman furnace unitAir conditioner electrical connections testing with meterElectrical current clamp meter checking HVAC unit wiring
Oscar Gruber
Solace Heating and Air in Memphis, TN inspected all electrical connections and components of HVAC units. They cleaned evaporator and condenser coils, replaced customer-supplied filters, and verified the units’ operation. They also recommended installing surge protectors for outdoor units.
Check-in Location
Air vent temperature check with infrared thermometer
Air vent temperature check with infrared thermometerAir conditioner units with cleaned coils and replaced filtersElectrical connections on HVAC unit with clamp meterAC capacitor testing with clamp meter on condenser fanHVAC air filters installed near ductwork in attic
Alex Martin
Solace Heating and Air repaired an upstairs air conditioning system in Memphis, TN. They diagnosed the issue causing no AC upstairs and restored proper cooling function efficiently.
Check-in Location
Upstairs AC condenser unit with HVAC diagnostic tools
Oscar Gruber
Solace Heating and Air performed a detailed HVAC inspection in Collierville, TN, testing electrical connections, filters, blower wheels, and evaporator coils, plus cleaning condenser coils. Both systems passed tests and are cooling as expected.
Check-in Location
HVAC vent temperature check with infrared thermometer
HVAC vent temperature check with infrared thermometerElectrical wiring with clamp meter measuring currentHVAC capacitor testing with digital clamp meterCapacitor tested with clamp meter in HVAC systemRheem outdoor air conditioner condenser units side by side
Oscar Gruber
Solace Heating and Air inspected and tested all electrical connections and components in Germantown, TN. They replaced customer-supplied filters, cleaned condenser coils, and checked blower wheels and evaporator coils. Both systems operate normally, and surge protectors are recommended for outdoor units.
Check-in Location
HVAC ceiling vent temperature checked with infrared gun
HVAC ceiling vent temperature checked with infrared gunCapacitor testing on HVAC condenser coil fan motorHVAC air filters stacked by furnace unit on floorFurnace unit with vent pipe and surrounding ductworkCondenser coil and outdoor HVAC unit maintenance
Oscar Gruber
Solace Heating and Air inspected all electrical components and replaced a faulty dual run capacitor in Memphis, TN. They cleaned the condenser coil, checked the filter, blower wheel, and evaporator coil. The unit operates and cools normally. They recommended installing an evaporator overflow switch due to the absence of a drain pan.
Check-in Location
HVAC vent temperature reading with infrared thermometer
HVAC vent temperature reading with infrared thermometerDual run capacitors for HVAC system maintenanceDual run capacitor with connected electrical wiresDual run capacitor replacement on air conditioner unitDual run capacitor testing with multimeter on HVAC unit
Oscar Gruber
Solace Heating and Air conducted thorough inspections of electrical connections, filters, blower wheels, evaporator coils, and condenser coils in Memphis, TN. All components tested within manufacturer specifications, confirming both units operate and cool efficiently. Surge protector installation was recommended for enhanced system protection.
Check-in Location
Ceiling air vent temperature checked with infrared gun
Ceiling air vent temperature checked with infrared gunGoodman outdoor condenser unit with service tools nearbyElectrical connections on HVAC unit voltage testingHVAC blower wheel inside air handler unitGoodman furnace with duct and pipe connections
Oscar Gruber
Solace Heating and Air inspected HVAC electrical connections and components in Memphis, TN, including blower capacitors, filters, blower wheels, evaporator coils, and condenser coils. Both units passed all tests and operated efficiently, ensuring reliable cooling for homeowners.
Check-in Location
HVAC ceiling vent temperature check with infrared gun
HVAC ceiling vent temperature check with infrared gunHVAC electrical current clamp testing with meterCondenser unit with technician tool bag on gravel padHVAC air filters stacked on attic floorBlower capacitor voltage testing with multimeter on wood floor
Oscar Gruber
Solace Heating and Air inspected electrical components and filters in Germantown, TN. They replaced one customer-supplied filter and checked blower wheels, evaporator, and condenser coils. They ensured all three HVAC systems operated and cooled properly. They also provided quotes for new indoor air quality products.
Check-in Location
Ceiling vent temperature check with infrared thermometer
Ceiling vent temperature check with infrared thermometerHVAC electrical component testing with multimeter probeHVAC capacitor electrical current testing with clamp meterHVAC capacitor electrical current testing with meterHVAC air filter being replaced in furnace system
Oscar Gruber
Solace Heating and Air in Germantown, TN, inspects electrical connections and components, tests them to meet manufacturer standards, cleans condenser coils, and checks filters, blower wheels, and evaporator coils. They verify HVAC units operate correctly, ensuring proper cooling and performance.
Check-in Location
Evaporator coil with copper tubing and fins close-up
Evaporator coil with copper tubing and fins close-upHVAC vent temperature measured with infrared thermometerCeiling air vent temperature checked with infrared thermometerA/C capacitor testing with digital multimeter probesDigital clamp meter measuring HVAC electrical current
Oscar Gruber
Solace Heating and Air in Memphis, Tennessee inspected all electrical connections and components within manufacturer specifications. They cleaned the condenser coil, checked the filter, blower wheel, and evaporator coil, and confirmed the system operates and cools normally.
Check-in Location
HVAC vent temperature check with infrared thermometer
HVAC vent temperature check with infrared thermometerDigital clamp meter testing HVAC electrical connectionsCondenser coil and air conditioner unit exterior with debrisHVAC air filter being installed or replacedEvaporator coil electrical connections testing with meter
Alex Martin
Solace Heating and Air performed cooling maintenance in Memphis, Tennessee. They cleaned the condenser, checked electrical components, inspected refrigerant levels, flushed the condensate drain, and verified thermostat operation. They also assessed system airflow, temperature split, and overall efficiency to ensure proper cooling and prevent future breakdowns.
Check-in Location
Condenser unit cleared for airflow and efficiency
Oscar Gruber
Solace Heating and Air in Memphis, TN inspected and tested all electrical connections and components within manufacturer specifications. They checked the blower wheel and condenser coil, replaced one AprilAire filter, and confirmed the unit runs and cools properly.
Check-in Location
Condenser coil and blower wheel on outdoor AC unit
Condenser coil and blower wheel on outdoor AC unitAprilAire air filters before and after replacementCapacitor electrical testing with clamp meter on wood floorCeiling air vent temperature measurement with laser thermometerAC capacitor testing with clamp meter on HVAC unit
Alex Martin
Solace Heating and Air in Memphis, TN performs cooling maintenance by cleaning condenser units, checking electrical components, inspecting refrigerant levels, and flushing drain lines. They measure system performance and airflow to ensure efficient cooling and prevent future breakdowns.
Check-in Location
Furnace intake vent and Goodman HVAC unit temperature check
Oscar Gruber
Solace Heating and Air inspected electrical components, blower wheel, evaporator and condenser coils, replaced a 16x25x1 filter, and verified the Memphis, TN HVAC unit cools efficiently within manufacturer standards.
Check-in Location
Air vent temperature check with infrared thermometer
Air vent temperature check with infrared thermometerHVAC condenser unit electrical testing with multimeterEvaporator coil inspection using borescope toolAir conditioner filters side by side, one new one usedCondenser coil unit with fan and service tools outside
Oscar Gruber
Solace Heating and Air inspected and tested electrical components in Memphis, TN, cleaned AprilAire 413 filters, blower wheels, evaporator coils, and condenser coils. They verified both systems operate and cool properly and recommended new indoor air quality products.
HVAC vent airflow testing with laser anemometer
HVAC vent airflow testing with laser anemometerCarrier outdoor air conditioning units on concrete padAprilAire 413 air filter installed in HVAC systemBorescope inspection of HVAC system componentsElectrical wiring inspection using video scope tool
Oscar Gruber
Solace Heating and Air in Tupelo, MS checks electrical connections, blower wheels, filters, evaporator coils, and condenser coils. They test all components to ensure systems run and cool normally.
Check-in Location
HVAC ceiling vent temperature check with infrared gun
HVAC ceiling vent temperature check with infrared gunCeiling air vent temperature check with laser thermometerBlower wheel and motor inside HVAC system unitHVAC refrigerant line inspection with Klein Tools borescopeCondenser unit with fan and protective grille outdoors
Oscar Gruber
Solace Heating and Air replaced a faulty transformer in an HVAC unit in Memphis, TN. The replacement restored the 24-volt output, allowing both units to operate and cool properly. This service ensures reliable heating and air conditioning system performance.
Check-in Location
Thermostat with digital temperature display set to 83°F
Thermostat with digital temperature display set to 83°FThermostat control panel displaying 81°F cooling modeHVAC vent temperature being checked with infrared deviceHVAC transformer replacement with wiring and multimeterTransformer and wiring inside HVAC unit with wire connectors
Oscar Gruber
Solace Heating and Air inspected and tested all electrical connections and components of two HVAC systems in Memphis, TN. They cleaned filters, blower wheels, evaporator coils, and condenser coils. Both systems were confirmed to operate and cool within manufacturer specifications.
Check-in Location
Floor vent temperature check with infrared thermometer
Floor vent temperature check with infrared thermometerAC capacitor and digital clamp meter on condenser fanCondensate drain pipe inspected using inspection cameraFurnace vent pipe and air handler unit in basementBlower wheel and housing inside HVAC system
Oscar Gruber
Solace Heating and Air cleared wasp debris from the furnace inducer assembly in Olive Branch, MS. This removal restored proper furnace operation and heating.
Check-in Location
Furnace inducer assembly clogged with wasps and debris
Furnace inducer assembly clogged with wasps and debrisInducer assembly with wiring and tubing in furnaceFurnace burner assembly with active flame and wiringAir vent airflow testing with handheld meterCeiling air vent temperature check with infrared gun
Oscar Gruber
Solace Heating and Air in Memphis, TN, inspected electrical connections, replacing one dual run capacitor. They checked filters, blower wheels, evaporator coils, and condenser coils. Both systems were tested and found to run and cool normally.
Check-in Location
Floor vent temperature reading with handheld infrared thermometer
Floor vent temperature reading with handheld infrared thermometerDual run capacitor replacement on HVAC unit wiringDual run capacitor with multicolor wiring on HVAC unitHVAC air filters old and new comparison on floorEvaporator coil and rusted metal frame close-up
Alex Martin
Solace Heating and Air in Memphis, TN performs cooling maintenance by cleaning condenser units, checking capacitors, inspecting refrigerant levels, measuring compressor and motor amp draw, and flushing drain lines. They verify thermostat operation, inspect coils, electrical connections, and system startup to ensure efficient and safe cooling performance.
Check-in Location
Furnace blower motor and wiring inspection
Furnace blower motor and wiring inspectionFurnace air handler unit with insulation repairs
Oscar Gruber
Solace Heating and Air inspected electrical connections and components in Memphis, TN. They checked the filter, blower wheel, evaporator coil, and condenser coil. They tested the unit’s operation and confirmed it is running and cooling within manufacturer specifications.
Check-in Location
Floor vent temperature check with infrared thermometer
Floor vent temperature check with infrared thermometerGoodman outdoor air conditioner unit on concrete padEvaporator coil inspection with Klein Tools borescopeClamp meter measuring HVAC electrical currentAirtemp HVAC unit with electrical and coil inspection
Oscar Gruber
Solace Heating and Air inspected all electrical connections and replaced the downstairs blower capacitor in a Memphis, Tennessee home. They cleaned filters, blower wheels, evaporator coils, and condenser coils. They confirmed the systems operate and cool normally after service.
Check-in Location
Alex Martin
Solace Heating and Air in Memphis, TN, performed a cooling maintenance service. They cleaned the condenser unit, checked capacitors, refrigerant charge, and electrical components. The team inspected airflow, measured temperature split, flushed the drain line, and verified thermostat and system operations to ensure efficient and safe function.
Check-in Location
Condenser units on outdoor HVAC system for cooling maintenance
Alex Martin
Solace Heating and Air in Memphis, TN performed cooling maintenance by cleaning the condenser, checking capacitors, refrigerant levels, and electrical components. They inspected airflow, thermostat operation, and system performance to ensure efficient and safe AC operation while preventing potential breakdowns.
Check-in Location
Condenser unit cleaning and AC system inspection outdoors
Condenser unit cleaning and AC system inspection outdoorsFurnace unit inside utility closet in basement
Alex Martin
Solace Heating and Air provides cooling maintenance in Memphis, TN. They clean condenser units, check capacitors and refrigerant levels, inspect electrical components, flush drain lines, and verify thermostat operation to ensure efficient system performance and prevent breakdowns.
Check-in Location
Furnace system with duct and PVC piping maintenance
Furnace system with duct and PVC piping maintenanceCondenser units lined up for HVAC cooling maintenance in Memphis
Alex Martin
Solace Heating and Air in Memphis, TN replaced a 16x25x1 air filter, condenser capacitor, and contactor to fix air conditioning failure. They inspected refrigerant levels, measured temperature across the evaporator coil, and tested system startup and shutdown. The system now operates within manufacturer specifications with a 1-year parts warranty.
Check-in Location
Condenser contactor with wiring and dust buildup
Condenser contactor with wiring and dust buildupAir filters showing dirty and new replacements near water heaterCondenser capacitor with wiring inside HVAC unit
Oscar Gruber
Solace Heating and Air in Memphis, TN inspected and tested electrical connections and components in HVAC systems. They identified three capacitors needing replacement, checked filters, blower wheels, evaporator coils, and condenser coils. Systems operate and cool normally. Pan overflow switches were recommended for added safety.
Check-in Location
Air vent temperature check with infrared thermometer
Air vent temperature check with infrared thermometerDual run capacitor testing on HVAC unit electrical systemDual run capacitor voltage tested with multimeter close-upEvaporator coil inspection with Klein Tools scopeDual run capacitors on Ameristar air conditioner unit
Oscar Gruber
Solace Heating and Air inspected electrical connections and components in Memphis, TN. They replaced three blower capacitors and checked filters, blower wheels, evaporator coils, and condenser coils. They confirmed all units operate and cool normally after the service.
Check-in Location
Blower motor capacitors replaced on floor with screwdriver
Blower motor capacitors replaced on floor with screwdriverBlower capacitors replaced on wooden floor near toolsBlower capacitors replaced on HVAC system outdoorsAir vent temperature check with digital infrared thermometerBorescope inspection of HVAC duct interior
Alex Martin
Solace Heating and Air provided a commercial air conditioning service call in Tupelo, Mississippi. They inspected and diagnosed the AC system to identify issues affecting its operation. The service aimed to restore proper cooling performance for the business location.
Check-in Location
Commercial HVAC unit above ceiling tile missing panel
Alex Martin
Solace Heating and Air performed a full HVAC system inspection in Memphis, TN. They checked refrigerant levels, air filter cleanliness, condensate drain condition, and capacitor function. They also measured temperature split and compressor amp draw. All components operated within manufacturer specifications during the service.
Check-in Location
Furnace unit with PVC vent pipe in utility closet
Alex Martin
Solace Heating and Air in Memphis, TN offers duct and dryer vent cleaning services. They inspect ductwork and identify issues such as flue vent pipes secured with screws and tape. They also provide repair estimates to ensure proper vent function and safety.
Check-in Location
Flue vent pipe with screws and tape on HVAC system
Check-ins - Reviews - Content - Ranking

It Was a Pleasure Serving You!



×

Schedule Now

Name
Address