Jackson, TN
Select Your Location
Jackson Jackson, TN. 38305 Set as my Location
Memphis Memphis, TN. 38134 Set as my Location
Nashville Nashville, TN. 37072 Set as my Location

Emergency Services

We’re Here For You

Contact Us For Immediate Emergency Service

Phone Number:

How Fast Can We Get To You?

Contact Us Today!

Name
Address

Most Recent Pins (31)

Conner Droke
Solace Heating and Air in Jackson, TN inspected a frozen HVAC unit. They identified leaks and oil buildup in the evaporator pan. The technician provided an estimate for a new system to the customer.
Pin Photo
Pin PhotoPin PhotoPin PhotoPin Photo
Conner Droke
Solace Heating and Air in Jackson, TN inspected an air conditioning unit that was not cooling. They found the blower motor working but the condenser was not connected properly. After correctly hooking up the condenser, they tested the system and confirmed it functioned as expected.
Air conditioner insulated refrigerant line damage close-up
Air conditioner insulated refrigerant line damage close-upRefrigerant pressure gauge measuring HVAC system psiAir conditioner control board wiring connections close-upHVAC control board wiring with wire connectorsHVAC control board with connected wiring in unit
Conner Droke
Solace Heating and Air provided a service call in Newbern, TN, diagnosing a cooling issue. They found the unit low on Freon and added five pounds to restore function. They informed the customer about a possible leak affecting Freon levels.
Thermostat display showing room temperature 82°F
Thermostat display showing room temperature 82°FAir vent digital thermometer measuring temperatureRefrigerant manifold gauge on air conditioning unitFreon gauge and HVAC manifold on grass case
Conner Droke
Solace Heating and Air inspected an air conditioning unit in Jackson, TN, and found it overcharged with Freon. They removed one and a half pounds of Freon, which improved the unit's operation and efficiency. The customer confirmed the unit worked better after the service.
Refrigerant manifold gauge measuring AC unit pressures
Refrigerant manifold gauge measuring AC unit pressuresFloor vent air temperature check with digital thermometerRefrigerant manifold gauge on HVAC unit readingsHVAC outdoor unit with opened panel and drill on topThermostat with inserted temperature probe and digital display
Conner Droke
Solace Heating and Air performed a tune-up on an HVAC unit in Bell, TN. They inspected all components, cleaned the dirty condenser, and verified the refrigerant level with R-410A, ensuring the unit operated within the proper range.
Trane XL16i air conditioner condenser unit outdoors
Trane XL16i air conditioner condenser unit outdoorsCapacitor and wiring on HVAC unit with rust and dustDigital clamp meter measuring electrical currentHVAC Freon pressure gauge on condenser unitDuctwork and insulation in attic space
Conner Droke
Solace Heating and Air in Jackson, TN inspected a frozen HVAC unit, identified low Freon levels, and performed a leak search. They added Freon to restore proper cooling function and confirmed the system operates correctly after service.
Evaporator coil inside HVAC unit close-up view
Evaporator coil inside HVAC unit close-up viewRefrigerant manifold gauge on AC condenser unitAir conditioner refrigerant service with hoses and gauges
Conner Droke
Solace Heating and Air serviced two HVAC systems in Humboldt, TN. They performed tune-ups, identified a low capacitor on the downstairs unit, replaced it, cleaned both systems, and confirmed refrigerant levels were adequate. The systems were fully inspected and maintenance was completed successfully.
Furnace draft inducer motor with wiring and ducting
Furnace draft inducer motor with wiring and ductingHVAC control board with multicolored wiring connectionsGoodman furnace with replaced capacitor and ductworkCapacitor and wiring inside HVAC unit panel
Conner Droke
Solace Heating and Air provided a service call in Dyersburg, TN, diagnosing a non-working unit. They identified a faulty condensing coil, cleaned the unit, and verified the entire system operated correctly after the repair.
Refrigerant manifold gauges on HVAC condensing unit
Refrigerant manifold gauges on HVAC condensing unitClamp meter measuring HVAC system current outdoorsCondensing coil rust and model label on HVAC unitAC contactor wiring and capacitor inside HVAC panel
Conner Droke
Solace Heating and Air in Jackson, TN provides thorough HVAC tuneups. They inspect and clean the entire system, including capacitors, wiring, and control boards, ensuring all parts function properly. This detailed maintenance helps keep HVAC units running efficiently and reliably.
Trane XR outdoor air conditioner unit cleaning and inspection
Trane XR outdoor air conditioner unit cleaning and inspectionHVAC outdoor condenser unit with clean grille and wiringHVAC capacitor and wiring inside unit panelHVAC capacitor with wiring and metal housingFurnace unit with ventilation and piping in attic
Conner Droke
Solace Heating and Air performed a tuneup on a split heat pump in Bell, TN. They inspected the attic and outdoor unit, checked the capacitor, wiring, contactor boards, and connections. After cleaning dust from the system, they confirmed proper Freon levels and found no issues.
Split heat pump outdoor unit on concrete pad
Split heat pump outdoor unit on concrete padSplit heat pump outdoor unit with clean coilsHeat pump capacitor testing with multimeter probeClamp meter measuring air conditioning unit currentSplit heat pump attic unit with tool on top
Conner Droke
Solace Heating and Air in Medina, TN inspected an air handler with a tripped breaker. They checked the air handler amps and breaker box, noted all breakers were GFCI types, and identified possible accidental tripping caused by nearby pool work.
Air handler clamp meter reading showing 0.93 amps
Air handler clamp meter reading showing 0.93 ampsAir handler electrical panel with clamp meter testingBreaker panel labels for kitchen and bedroom circuitsBreaker box panel with multiple GFI breakers installed
Conner Droke
Solace Heating and Air replaced a faulty smoke alarm in Jackson, TN. After installation, they tested the entire system to confirm all components worked properly. This service ensures your smoke alarm functions correctly and your heating and air systems remain safe.
Smoke alarm control panel wiring connections and terminals
Smoke alarm control panel wiring connections and terminalsSmoke alarm control panel wiring and connectionsSmoke alarm control panel wiring and connectionsSmoke alarm control panel wiring connections close-up
Conner Droke
Solace Heating and Air performed a one-hour HVAC tune-up in Jackson, TN. They inspected internal and external components, including capacitors, wiring, boards, and contractors. They cleaned the condensing coil and verified the Freon levels to ensure the system operates properly.
Air conditioning unit wiring with debris buildup interior
Air conditioning unit wiring with debris buildup interiorDigital clamp meter measuring HVAC system voltageAC capacitor and wiring with connectors inside panelHVAC capacitor and wiring inside outdoor unit panel
Conner Droke
Solace Heating and Air in Jackson, TN provides HVAC system tune-ups. They inspect split gas units, air handlers, and outdoor condenser components. The service includes cleaning and checking Freon levels to ensure the system operates efficiently and reliably.
Refrigerant gauge attached to outdoor AC condenser unit
Refrigerant gauge attached to outdoor AC condenser unitElectrical clamp meter measuring current on dry groundHVAC wiring connections with wire nuts on brick wallAir conditioner capacitor and relay with wiring connectionsHVAC control board wiring with multicolored wires
Conner Droke
Solace Heating and Air performed tune-ups on two package gas systems in Brownsville, TN. They inspected contactors, capacitors, control boards, wiring, motors, and Freon levels. Both systems were cleaned and tested to ensure proper operation. They also identified ductwork insulation issues and provided an estimate to the customer.
HVAC compressor with manifold gauges and wiring connections
HVAC compressor with manifold gauges and wiring connectionsRefrigerant manifold gauge on package gas systemRefrigerant manifold gauge measuring R410A system pressuresDuctwork interior showing damaged insulation and debrisDuctwork insulation debris on rooftop duct system
Conner Droke
Solace Heating and Air performed a six-system tune-up on a commercial building in Jackson, TN. They inspected wiring, capacitors, and drain lines, checked the attic and Samsung mini split air handler, and cleaned the outdoor units. All systems operated efficiently after the service.
Refrigerant pressure gauge on HVAC copper tubing
Refrigerant pressure gauge on HVAC copper tubingHVAC wiring bundle with technician hand adjusting wiresClamp meter measuring HVAC unit electrical currentSamsung mini split air handler wiring and capacitor check outdoorsAC capacitor testing with multimeter probes in HVAC unit
Conner Droke
Solace Heating and Air replaced two warranty boards on a Samsung mini split system in Paris, TN. They tested the heating and cooling functions, confirming both operated efficiently with no current issues. The service ensures reliable performance for your HVAC system.
Samsung mini split control board with wiring connections
Samsung mini split control board with wiring connectionsSamsung mini split control board display with wiringSamsung mini split control board with wiring connections
Conner Droke
Solace Heating and Air repaired a thermostat wire short caused by rodent damage on a 2007 American Standard unit in Beech Bluff, TN. They tested the entire system, ensuring it operated efficiently and without leaks.
Refrigerant pressure gauge on HVAC condenser unit
Refrigerant pressure gauge on HVAC condenser unitThermostat wire with rodent damage near HVAC unitAmerican Standard HVAC unit label with wire connectors
Conner Droke
Solace Heating and Air serviced a split train heat pump in Jackson, TN. They identified a thermostat issue that prevented the condenser's reversing valve from receiving 24 V power. After replacing the thermostat, they restored proper function and verified the unit had no additional problems.
Conner Droke
Solace Heating and Air repaired burnt wires on heat strips in a mobile home unit in Medon, TN. After replacing the damaged wires, they tested the heating system to ensure it worked properly.
Heat strip wiring with burnt wire repair in HVAC unit
Heat strip wiring with burnt wire repair in HVAC unitHeat strip wiring with burnt and replaced wiresHeat strips with burnt wiring and replaced connections
Conner Droke
Solace Heating and Air cleaned the vent motor pressure area to remove wasp blockage caused by cold outdoor temperatures. After cleaning, they tested the unit to ensure proper operation and found no issues. This service was performed in the local area.
Vent motor and wiring inside HVAC unit
Jared Coel
Solace Heating and Air serviced an older Trane package heat pump in Jackson, Tennessee. They diagnosed a no-heat issue caused by a faulty outdoor TXV. The technician assessed the system and provided the customer with repair options.
Check-in Location
Refrigerant manifold gauge measuring R410A pressures
Refrigerant manifold gauge measuring R410A pressuresOutdoor TXV valve with copper refrigerant lines in heat pumpOutdoor TXV copper lines on Trane heat pump unit
Conner Droke
Solace Heating and Air repaired a blown 24V three-amp fuse, inspected system components, tightened all connections, and tested heating, cooling, and strip heat functions. The unit operated efficiently after service. This HVAC maintenance was performed in an unspecified location.
HVAC control board with blown fuse and corrosion
HVAC control board with blown fuse and corrosionHVAC control board with blown 24V fuse replacedHVAC compressor and wiring inside unit with pipes and fuseFurnace control board and wiring with fuse replaced
Jared Coel
A technician in Jackson, Tennessee inspected a non-working Rheem HVAC unit and identified a locked-up blower motor. The technician presented repair options to the customer to restore system function.
Check-in Location
Electrical multimeter measuring microfarads on HVAC unit
Electrical multimeter measuring microfarads on HVAC unitBlower motor capacitor on Rheem HVAC unit with rustRheem HVAC blower motor locking inspection
Jared Coel
Solace Heating and Air diagnosed two Samsung VRF units in Jackson, Tennessee, detecting leaking condenser coils and offering tailored repair solutions to restore system efficiency.
Check-in Location
Samsung VRF condenser coil copper tubing assembly
Samsung VRF condenser coil copper tubing assemblySamsung VRF leaking condenser coil tubing close-upR410A refrigerant manifold gauge with pressure readings
Kein Hernandez
A technician inspected a 2007 Lennox system with no heat in Moscow, Tennessee. The diagnosis showed a failed condenser fan motor, contactor, and capacitor. The customer deferred repairs for a future visit.
Check-in Location
Lennox HVAC unit specification and warning labels
Lennox HVAC unit specification and warning labelsLennox condenser unit label and vent grille close-up
Jared Coel
Solace Heating and Air inspected an Ameristar gas package system in Brownsville, Tennessee. Technicians found the unit operational but detected a weak blower motor capacitor. They replaced the capacitor to maintain proper heating function.
Check-in Location
Blower motor capacitor and wiring in HVAC system
Blower motor capacitor and wiring in HVAC systemBlower motor capacitor tested with digital multimeterElectrical meter testing on HVAC control panel
Jared Coel
Solace Heating and Air repaired a 20-year-old American Standard gas furnace in Brownsville, Tennessee. The technician replaced a faulty inducer motor and a weak blower capacitor. The system was tested and confirmed to be heating properly after the repair.
Check-in Location
American Standard furnace inducer motor and capacitor replacement
American Standard furnace inducer motor and capacitor replacementBlower motor capacitor and voltmeter testing setupGas furnace inducer motor and blower capacitor replacement
Conner Droke
Technicians replaced a faulty control board and igniter in a Trane HVAC unit. After installation, they tested the system to confirm proper operation. This heating repair service was completed by Solace Heating and Air in Amarillo, Texas.
Gas valve assembly and burner tubes inside HVAC unit
Gas valve assembly and burner tubes inside HVAC unitTrain unit circuit board with wiring connectionsControl board replacement in HVAC system with wiring
Drew Layton
Check-in Location
Josh Buckley
Solace Heating and Air repaired an advanced HVAC system in Charlotte, North Carolina. Technicians located and replaced damaged components caused by a short in the staging boards. They synchronized all four operational stages to restore proper system function across multiple days of service.
Pin Photo
Pin PhotoPin PhotoPin PhotoPin Photo
Check-ins - Reviews - Content - Ranking

It Was a Pleasure Serving You!



×

Schedule Now

Name
Address