Most Recent Pins (29)
Josh Buckley
Solace Heating and Air inspected electrical connections and measured component amperage in Memphis, Tennessee. Technicians confirmed all values met specifications. They also checked safety controls and the heat exchanger to ensure safe furnace operation. The system is ready for the heating season.





Jared Coel
Solace Heating and Air completed fall heating maintenance on a Carrier gas furnace in October 2025. The technician inspected the heat exchanger, evaporator coil, blower assembly, and burners to confirm the system was operating correctly and ready for the heating season. Location details were not provided.




Jared Coel
Solace Heating and Air completed fall heating maintenance on a Trane natural gas furnace in Livonia, Michigan. The technician inspected the coils, heat exchanger, blower motor, inducer motor, and burner assembly. The service confirmed the system is heating correctly and safely for the season.




Jared Coel
A technician repaired a Luxaire gas package unit in Florence, South Carolina. The unit was not cooling due to a swollen dual capacitor. The technician replaced the faulty capacitor and confirmed the rest of the system was operating correctly.




Jared Coel
Solace Heating and Air completed fall heating maintenance on two split heat pump systems in Georgia. The technician inspected refrigerant coils, checked refrigerant pressures, and tested capacitors and motor amp draws to ensure proper operation ahead of cooler weather.




Jared Coel
Solace Heating and Air completed fall heating maintenance on an Ameristar gas package system. The technician inspected the burners, inducer motor, igniter, and heat exchanger to ensure they were functioning properly. This service helps maintain system efficiency and supports reliable heating performance through the colder months. Location details were not provided.

Jared Coel
Solace Heating and Air completed fall heating maintenance on a split heat pump and a gas package system in Georgia. Technicians cleaned coils, blower assemblies, inducer ports, and sensors to prepare both units for the heating season.

Jared Coel
Solace Heating and Air completed fall heating maintenance on a Trane gas package system in [City], [State]. The technician inspected the unit, found corrosion on the burner assembly, discussed repair options, and confirmed the system works properly for winter use.




Jared Coel
Solace Heating and Air completed fall maintenance on a Trane gas package system in [City], [State]. Technicians inspected the heat exchanger, blower wheel, evaporator, and heating components. They confirmed the system functions correctly and is prepared for winter use.




Jared Coel
A technician inspected a Rheem gas package unit and found a rusted inducer motor causing a no-heat issue. The technician explained the problem and discussed repair options with the customer in Fort Smith, Arkansas.




Jared Coel
Solace Heating and Air inspected a natural gas fireplace in Oklahoma City, Oklahoma. The technician checked that the venting and oxygen depletion sensor met code requirements. They cleaned the thermocouple and confirmed the fireplace operated correctly.




Jared Coel
Solace Heating and Air completed fall maintenance on a Trane gas furnace in Conyers, Georgia. The technician cleaned the air filter, evaporator, and blower wheel. They also tested the inducer motor, gas valve, and burners, and inspected the heat exchanger for proper function and safety.




Jared Coel
Solace Heating and Air completed fall heating maintenance on an older Trane package heat pump system in North Carolina. The technician inspected motor operation, checked refrigerant pressures, confirmed proper defrost cycling, and verified that the heat strips were functioning correctly.




Jared Coel
Solace Heating and Air completed fall heating maintenance in Greensboro, North Carolina. The service included inspecting a gas package unit and a split heat pump system. Technicians checked motors, heat exchangers, heating strips, and the burner assembly to confirm both systems operate properly for the winter season.




Jared Coel
A technician from Solace Heating and Air inspected a York split heat pump in Jacksonville, Florida. The system was not cooling due to a short that caused the low voltage fuse to blow. The technician diagnosed the issue and presented repair options to the customer.




Jared Coel
Solace Heating and Air completed fall maintenance on a Nordyne air handler in Madison, Alabama. The technician inspected heat strip wiring, confirmed amp levels were correct, and identified a blower motor drawing excess current. Repair options were reviewed with the client to address the issue.




Jared Coel
Solace Heating and Air completed fall maintenance on a Bryant gas package system in North Carolina. Technicians cleaned rusted burners that were preventing ignition. They inspected the heat exchanger, inducer motor, and related components to confirm proper function before winter.




Jared Coel
A technician completed fall heating maintenance on a Trane gas furnace in Solace, North Carolina. The service included cleaning the flame sensor and pressure port, inspecting the heat exchanger, and confirming that all motors operate correctly. The furnace is now prepared for the upcoming heating season.

Jared Coel
Solace Heating and Air completed a fall tuneup in Denton, Texas on a gas split system and a gas package system. The technician cleaned flame sensors, checked safety switches, confirmed motor operation, and inspected heat exchangers for proper function.




Jared Coel
Solace Heating and Air performed seasonal heating maintenance on a gas package system in Spring Hill, Tennessee. Technicians inspected all components and confirmed the unit is heating the home correctly. This service helps maintain system performance and ensures reliable operation during colder months.




Jared Coel
Solace Heating and Air completed fall maintenance on a Trane gas package system in North Carolina. Technicians removed a wasp nest from the inducer motor, inspected all heating components, and confirmed the unit operates correctly. The system is now ready for the colder season and functioning as expected.




Jared Coel
A technician from Solace Heating and Air replaced a faulty blower motor on a Carrier split heat pump in North Carolina. They confirmed the unit is operating correctly and cooling efficiently after the repair.




Jared Coel
Solace Heating and Air responded to a no-cool issue on a 2004 Rheem gas package system. Technicians identified a weak compressor start capacitor, replaced it, and confirmed the system now functions correctly. Location details were not provided.




Jared Coel
Solace Heating and Air replaced a recalled control board on an American Standard gas package unit in Denton, Texas. The team confirmed the unit now operates correctly with no remaining issues.




Jared Coel
Solace Heating and Air completed heating maintenance on a Trane dual fuel package system in Monroe, North Carolina. The technician checked the heat pump, defrost function, and gas backup operation. The service included identifying and reporting any needed repairs to the homeowner.




Jared Coel
A technician in Jackson, Tennessee replaced a damaged blower motor and furnace control board on a York gas furnace. The repair restored full heating system function and ensured proper airflow and safety. System performance was tested and confirmed after installation.





Jared Coel
A technician from Solace Heating and Air responded to a no cooling issue in a residential HVAC system. The unit was low on refrigerant. The technician identified a leak in the TXV and placed an order for a replacement TXV to restore proper system function. Location data was not provided.



Drew Layton

Josh Buckley
Solace Heating and Air repaired an advanced HVAC system in Charlotte, North Carolina. Technicians located and replaced damaged components caused by a short in the staging boards. They synchronized all four operational stages to restore proper system function across multiple days of service.





Maps data from OpenStreetMap © OpenStreetMap

